hello andré, I don't have as much mileage as you in pantone, especially since last November I changed the engine on my 106 (beginning of failure of the head gasket) and that I have not yet reassembled it since .So with about 8000 km in pantone my rod has remained clean maybe is it ...

slim i was wrong i wanted to answer andre
if a modo can fix the error it would be nice.
please

hello andré, I don't have as much mileage as you in pantone, especially since last November I changed the engine on my 106 (beginning of failure of the head gasket) and that I have not yet reassembled it since .So with about 8000 km in pantone my rod has remained clean maybe is it ...

hello, I encourage this kind of initiative. Motorsport is a great showcase for many people, if we can show that a 350hp car pollutes less than a prius with a fuel consumption reduced by "x%" why deprive yourself of it? a pantone car race! that would be ...

hello jointbk, you said: "For more information ... or if you live in Alsace and you need help or advice" Here I am I am interested in your experience and I would like to know more about the complete diagram and modifications made on the fan. It would be nice to do p ...

Hello jeff2410 You want to talk about this: https://www.econologie.com/fichiers/partager/1214843725AHGd5U.jpg Not managed to find a general diagram of the thing. A + yes that's exactly it. the goal is to bubble the exhaust gas in a vertical tube half filled with water and recover the gas ...

Hello What explanation do you give to this? In your assemblies, what color is the rod after 6 months of operation? on the metal or it turns blue? The important thing is that it works, it is up to us to try to understand the why .. Or at least what to change to improve .. André Hello, Me ...

Hello everyone I suppose that the forced circulation of air and steam at low speed will give it a more "constant" operation or at least limit a hypothetical accumulation of water in the various pipes. I guess the reactor temperature drop will be a bit lower at ba ...

Indeed, Alex56 had to add a restriction at the outlet of its mainsail (diam 3mm?) To limit the quantity of steam entering the reactor. My small mainsail is already very remained because I used as an outlet tube a piece of recovery pipe which connects the injection pump to the 6mm ext ...

Hello We have completely different conceptions on the air / vapor ratio which enters the reactor What counts is the results. A mainsail will not evaporate more water than its capacity, it is useless to flood it. To pass more water you need some ventilation in the mainsail or ali ...