While waiting I save 129 euros seen that it and repaired
and now I have these things to do in case of concern before the m get in the way ....
other subject
ps I have an electric radiator from my owner who will like ....
the blower stays cold it no longer heats
what to do ????
to your comments
Bagless vacuum cleaner that no longer sucks: clean them !!
-
- Moderator
- posts: 79374
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11064
hey yes gina!
For the radiator I advise you to make a new subject by clicking on the new button ... I guess it's a thermostat problem ...
For the radiator I advise you to make a new subject by clicking on the new button ... I guess it's a thermostat problem ...
0 x
Do a image search or an text search - Netiquette of forum
-
- I discovered econologic
- posts: 9
- Registration: 08/10/14, 13:36
how to disassemble dyson
hello christophe,
I admire your prowess,
I have one of the springs that fell into the device,
I don’t manage to open it to remove the spring,
it blocks at the joint between the handle and the body of the device, 1/3 from the top,
I'm afraid to restart the vacuum cleaner like that
how did you succeed
I admire your prowess,
I have one of the springs that fell into the device,
I don’t manage to open it to remove the spring,
it blocks at the joint between the handle and the body of the device, 1/3 from the top,
I'm afraid to restart the vacuum cleaner like that
how did you succeed
0 x
-
- Moderator
- posts: 79374
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11064
Hello miiamiii,
Thank you (Hey guys I have one more admirer!)
Do you have exactly the same model of vacuum cleaner as the ones I disassembled above?
Logically with a few screwdrivers any vacuum cleaner can open ...
But sometimes the locations of the screws (screw wells) are blocked (small plastic studs, labels, silicone ...).
Can you take photos? To see where it blocks?
Thank you (Hey guys I have one more admirer!)
Do you have exactly the same model of vacuum cleaner as the ones I disassembled above?
Logically with a few screwdrivers any vacuum cleaner can open ...
But sometimes the locations of the screws (screw wells) are blocked (small plastic studs, labels, silicone ...).
Can you take photos? To see where it blocks?
0 x
Do a image search or an text search - Netiquette of forum
Bagless vacuum cleaner that no longer sucks: clean them !!
Christophe,
Thank you for your attention, and for responding so quickly,
well, i was wrong, it's a tornado t8 without a bag,
here is the photo
see you soon!
Thank you for your attention, and for responding so quickly,
well, i was wrong, it's a tornado t8 without a bag,
here is the photo
see you soon!
0 x
-
- Moderator
- posts: 79374
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11064
Sorry I don't know this model but I'm sure it can open ... maybe it's "clipped"?
Can you give us a photo from below?
Can you give us a photo from below?
0 x
Do a image search or an text search - Netiquette of forum
Back to "failure, troubleshooting and repair: repair yourself? "
Who is online ?
Users browsing this forum : Google [Bot] and 137 guests