Heating and home automation

Heating, insulation, ventilation, VMC, cooling ... short thermal comfort. Insulation, wood energy, heat pumps but also electricity, gas or oil, VMC ... Help in choosing and implementation, problem solving, optimization, tips and tricks ...
Marjun
I discovered econologic
I discovered econologic
posts: 2
Registration: 30/08/13, 12:54

Heating and home automation




by Marjun » 30/08/13, 13:35

Hello who has already used home automation to manage the heating in his house and what system has he used
0 x
Christophe
Moderator
Moderator
posts: 79422
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 11084




by Christophe » 30/08/13, 13:37

I believe that the simplest home automation is a thermostat :) No?

So my answer is obviously yes :)

Otherwise you have to develop your question ...
0 x
Marjun
I discovered econologic
I discovered econologic
posts: 2
Registration: 30/08/13, 12:54




by Marjun » 30/08/13, 16:09

The problem is that I do not know too much about home automation but I heard about zwave deltadomotique.fr/2155-controleurs-zwave and X10 as a basic protocol to manage home automation system.
What do you use?
0 x
laurent13310
I discovered econologic
I discovered econologic
posts: 1
Registration: 24/10/14, 23:10




by laurent13310 » 24/10/14, 23:16

Hello,

a little post digging up to say that yes zwave is the most used protocol (more than 200 brands).
on the other hand, the X10, c finished, very old, no more manufacturer insists on this protocol

if I have to recommend a box, ...., well the best on the market is quite simply the home centers from FIBARO .... the home center lite can be more than enough ....
and for info, I sell in MP ...

Hoping to have helped, even if you already had to find it for yourself ...
0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "Heating, insulation, ventilation, VMC, cooling ..."

Who is online ?

Users browsing this forum : No registered users and 294 guests