[QST] Put a switch on a power strip ??

[boblebricoleur]

Hi everybody,
Voila, at the level of my TV (and all the toutim) and my computer (rebelote) I 2 power strip that have no switch. Or as it is a power strip with surge, ... I do not want to replace them with simple power switch and not always do not want to put me 4 tabs for the switch .
Can we put a simple "classic" switch between the multi and the wall outlet? I leave the room, Tac, everything is cut, no more useless and greedy nightlights.

[Arthur_64]

You take a bisecting switch at MrBricolo / Casobidule / LeroyPimpim and it should be good.

It's big enough (switch often designed to be used as an outdoor wall switch) and can be operated by foot.

[Christophe]

Otherwise you can look here: https://www.econologie.com/shop/electricite-c-99

ps: what does QST mean in the title? QueSTion?

[boblebricoleur]

After posting this post (where la la! The repetition ) I made a rough estimate of the consumption per socket, because I have already seen plug / switch inserted between the wall outlet and the multi but tj limited to 1000W. Conclusion, at the same time 1000W I have more than enough, it is little but bcp at a time
I could not be satisfied with a stupid "light" switch, which I could directly embed in the furniture

If not | QST] yes it is for quizstion, dsl, the habit on others forum to specify immediately the form of the post (question, info, ...)

[Christophe]

Ok ok, I did not know about the QST ...