By searching by brand https://www.solutions-conduits.fr/sortie-verticale-courte-diflux-pellets-dinak-xml-425_456-1497.html Thank you! https://www.econologie.com/forums/smileys/Jumpup.gif There is a problem since their Compact Okofen models range from 22kW to 32kW :!: 29121C4F-1625-4DA6-B...

Hello, BIOTEN is the reference I found on the quote. Pictured what I saw on the boiler outlet pipe. For the exit to the roof, the photo is taken from the ground. The air intake is about a meter above the roof. I can take a more specific photo if needed. Good day...

Bernard01290 wrote:Power 22 kW.

How to find the duration of the cycles?
Thank you

In principle, while walking through the menus, there are two possibilities:
- Pellematic / Compact
- Or directly via the Measurements menu

In the long list on the right, there will be this:

Hello, The reference for the suction cup outlet is as follows: Vertical BIOTEN kit diam 130 / 200. At home Okofen has updated the software with the latest version... he said on February 1, with no effect. Good day Hello, I just called the company Seten, the person who answered me after...

Concerning Fontcouverte, the average of its cycles is 27 min and even considering the current settings made by O apart from trying to increase them in an astonishing way… Its flame temperature and depression instructions are respected, so I don't see anything on that side. software setting (the same base m...

Sicetaitsimple is the time elapsed between the switch-on order and the switch-off order. Your first idea is the right one 8) Thank you! So while I am confirming what I think I have understood, does this imply that you should definitely not oversize a pellet boiler? Af...

What is how many minutes of "good burn" flame for a 30 minute cycle? In other words, how much ignition time (and shutdown) on an Okofen? On my Thermorossi H34, when it's cold (= 100% cold = not started for days), it takes a good 15 minutes to ...

Sicetaitsimple is the time elapsed between the switch-on order and the switch-off order.
Your first idea is the right one

Concerning Fontcouverte, the average of its cycles is 27 min and again given the current adjustments made by O apart from trying to increase them in an astonishing way... Its flame temperature and depression instructions are respected, so I don't see anything in that regard. Fontcouverte or Bernard01290 if you...

Bernard01290, to compare with Fontcouverte here is some information on its installation:

Compact configured in 22kW
Software version 4.01
Is your burner also configured as pulse?