Hello
je suis nouveau
I just bought a ferroli burner 32 kw
Someone might tell me to have a continuous in the temperature
every day on which n ° J have tried day to day but I still have an A01
I just went to day 17 who must program from Monday to Sunday what do you think
thank you for the answer
cordially
Question about FERROLI burner kit 32 kw
I just bought a ferroli burner 32 kw
Hello Ramiro60
I do not know if it can help you?
Confront the perpleteness and accessibility of the programmer's command; for now I'm running in mode manuel 1 power, controlled by a room thermostat, independent circulator of the burner and controlled by a thermal switch 30 ° C and everything works perfectly; I prefer to wait and solve 1 problem at a time .... So I could see that A01 messages came after the breaking of pellet feed ..; It takes up to the top of the tube light screw. Do not move the tube unnecessarily pellets can settle down the screw and cause the rupture.J'ai also put the tube a little less vertical so that the light presents a wider opening.You can also find me on pellet burner Soon, Happy to confront our experience.
I do not know if it can help you?
Confront the perpleteness and accessibility of the programmer's command; for now I'm running in mode manuel 1 power, controlled by a room thermostat, independent circulator of the burner and controlled by a thermal switch 30 ° C and everything works perfectly; I prefer to wait and solve 1 problem at a time .... So I could see that A01 messages came after the breaking of pellet feed ..; It takes up to the top of the tube light screw. Do not move the tube unnecessarily pellets can settle down the screw and cause the rupture.J'ai also put the tube a little less vertical so that the light presents a wider opening.You can also find me on pellet burner Soon, Happy to confront our experience.
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 10 Replies
- 6167 views
-
Last message by Mobile phone number
View the latest post
05/02/23, 19:00A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 1 Replies
- 2175 views
-
Last message by phil59
View the latest post
31/10/22, 01:31A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 1 Replies
- 1535 views
-
Last message by Christophe
View the latest post
05/04/22, 23:45A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 0 Replies
- 4262 views
-
Last message by Adri50
View the latest post
22/11/19, 17:53A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 0 Replies
- 3983 views
-
Last message by MRR
View the latest post
19/11/15, 16:19A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
Back to "Heating, insulation, ventilation, VMC, cooling ..."
Who is online ?
Users browsing this forum : No registered users and 155 guests