Liquid nitrogen generator engine
-
- Grand Econologue
- posts: 751
- Registration: 13/10/07, 23:11
- x 40
-
- Econologue expert
- posts: 9847
- Registration: 31/10/16, 18:51
- Location: Lower Normandy
- x 2678
Re: Liquid nitrogen generator engine
Eric Dupont wrote:https://www.energieazoteliquide.com/
So, what's new in over 1,5 years? A demonstrator or a piece of a demonstrator that runs?
0 x
-
- Grand Econologue
- posts: 751
- Registration: 13/10/07, 23:11
- x 40
Re: Liquid nitrogen generator engine
I have an adiabatic piston expander which expanded air at 15 bar and which would be capable of expanding air at 300 bars in order to liquefy the air. and on the other hand I am creating an isothermal compressor at 300 bar which will supply the regulator. The compressor pump is running, I still have the valves and the high pressure tanks. The valves are almost finished. There may be a year of work to finish the compressor, adjust everything properly to be able to compress air at 300 bar isothermally with a good flow rate.
0 x
-
- Econologue expert
- posts: 13727
- Registration: 17/03/14, 23:42
- Location: picardie
- x 1526
- Contact :
Re: Liquid nitrogen generator engine
Lots of figures but the most important thing is missing: the yield between photovoltaic energy consumed/electrical energy returned after storageEric Dupont wrote:https://www.energieazoteliquide.com/
Since you have the pumps, you will be able to calculate it and provide it to your future sponsors.
0 x
-
- Econologue expert
- posts: 9847
- Registration: 31/10/16, 18:51
- Location: Lower Normandy
- x 2678
Re: Liquid nitrogen generator engine
Eric Dupont wrote:I have an adiabatic piston expander which expanded air at 15 bar and which would be capable of expanding air at 300 bars in order to liquefy the air. and on the other hand I am creating an isothermal compressor at 300 bar which will supply the regulator. The compressor pump is running, I still have the valves and the high pressure tanks. The valves are almost finished. There may be a year of work to finish the compressor, adjust everything properly to be able to compress air at 300 bar isothermally with a good flow rate.
So everything's OK!
0 x
-
- Grand Econologue
- posts: 751
- Registration: 13/10/07, 23:11
- x 40
Re: Liquid nitrogen generator engine
izentrop wrote:Lots of figures but the most important thing is missing: the yield between photovoltaic energy consumed/electrical energy returned after storageEric Dupont wrote:https://www.energieazoteliquide.com/
Since you have the pumps, you will be able to calculate it and provide it to your future sponsors.
I will answer this question, in theory it is possible to obtain a very high yield but more raw materials are needed, in my opinion what matters is the overall cost of the energy which comes out taking into account that a part is stored and another is consumed directly, or even lost, compared to other energy production systems, if photovoltaic energy costs nothing we do not need to have a very high storage yield , there is the cost of the investment which comes into play. with batteries it is impossible to store large quantities
0 x
-
- Econologue expert
- posts: 13727
- Registration: 17/03/14, 23:42
- Location: picardie
- x 1526
- Contact :
Re: Liquid nitrogen generator engine
It has to be more interesting than the “hydrogen” vector for investors to be interested in it, so let’s get to work
0 x
- plasmanu
- Econologue expert
- posts: 2847
- Registration: 21/11/04, 06:05
- Location: The 07170 Lavilledieu viaduct
- x 180
Re: Liquid nitrogen generator engine
I have a 40MPA (megapascal) 4500 PSI 300 BAR hand pump.
If that helps. I use it to inflate bikes but difficult to put in the backpack
If that helps. I use it to inflate bikes but difficult to put in the backpack
0 x
"Not to see Evil, not to hear Evil, not to speak Evil" 3 little monkeys Mizaru
-
- Econologue expert
- posts: 9847
- Registration: 31/10/16, 18:51
- Location: Lower Normandy
- x 2678
Re: Liquid nitrogen generator engine
plasmanu wrote:I have a 40MPA (megapascal) 4500 PSI 300 BAR hand pump.
If that helps. I use it to inflate bikes but difficult to put in the backpack
Your pump is not isothermal, you can check, the air you inject is hot.
No, you need a 300 bar isothermal compressor that Eric Dupont is building in his garage. In a year, the matter is closed. The thread is almost 6 years old.....
0 x
- plasmanu
- Econologue expert
- posts: 2847
- Registration: 21/11/04, 06:05
- Location: The 07170 Lavilledieu viaduct
- x 180
Re: Liquid nitrogen generator engine
Full garage in the basement does not have electricity.
It's already a start if the garage is super cold in the shade
It's already a start if the garage is super cold in the shade
0 x
"Not to see Evil, not to hear Evil, not to speak Evil" 3 little monkeys Mizaru
-
- Similar topics
- Replies
- views
- Last message
-
- 18 Replies
- 8511 views
-
Last message by Christophe
View the latest post
06/09/22, 00:50A subject posted in the forum : Innovations, inventions, patents and ideas for sustainable development
-
- 13 Replies
- 7886 views
-
Last message by Janic
View the latest post
20/06/21, 15:14A subject posted in the forum : Innovations, inventions, patents and ideas for sustainable development
-
- 42 Replies
- 31785 views
-
Last message by Lilieth78
View the latest post
20/05/18, 15:32A subject posted in the forum : Innovations, inventions, patents and ideas for sustainable development
-
- 23 Replies
- 22383 views
-
Last message by Ahmed
View the latest post
27/02/17, 19:56A subject posted in the forum : Innovations, inventions, patents and ideas for sustainable development
-
- 10 Replies
- 8798 views
-
Last message by Christophe
View the latest post
19/10/16, 23:32A subject posted in the forum : Innovations, inventions, patents and ideas for sustainable development
Go back to "Innovations, inventions, patents and ideas for sustainable development"
Who is online ?
Users browsing this forum : No registered users and 81 guests