Gildas wrote:Hello Flytox,
Flytox wrote:This link is very old ... the Gillier Pantone are well improved since time. This presentation is technically outdated .....
The video of Fabrice Donzeau on the previous page is the same editing, except that he added the jar of jam.
Yes, I would like those who make their old generation Pantone to demonstrate to us on a full tank (mixed gasoline / water) and not over a few minutes, that this solution is viable ... .... If many different assemblies visible on the net, with the separate fuel and water tank, have been invented for years, it was good that we had to get out of this problem of "differential" evaporation. between gasoline and water so that it works ... for a long time and without incessant re-adjustments.
Detail that must make the difference by sending only steam
cutting in the reactor.
The serial "jam jar" is a good idea to try, to remove the surplus of large (dangerous) drops of water, but from there to make a dry steam ..... there are some big doubts. The transit time of the steam in the pipes is very "short" (in 1/10 of a second?) Between the bubbler and the cylinder head. The evaporation time of the water drops is certainly "longer" (in seconds?), Especially since the temperature should not be very high (the pipes are plastic).
AMHA is a mist of gas, water vapor and droplets of water that reaches the breech but certainly not dry steam.