INEL regulator
-
- I discovered econologic
- posts: 4
- Registration: 24/01/08, 22:30
- Location: LYON
INEL regulator
Hello everyone, I read with attention and a lot of interest your messages concerning the regulation of a heated floor. Personally, my regulator is an INEL model RWTM2 brand. You have just explained to me how to adjust the slope and I thank you for it. I would like to know now what the two settings of each stage correspond to, namely: xk1 and xd1 for the 1st stage, and xk2 and xd2 for the 2nd stage. To come back to the adjustment of the slope, no adjustment can be optimum knowing that the outside temperature varies at home from -8 to +10 in winter. Thank you in advance for your answers.
0 x
- Capt_Maloche
- Moderator
- posts: 4559
- Registration: 29/07/06, 11:14
- Location: Ile-de-France
- x 42
see some answers here: https://www.econologie.com/forums/reglage-d- ... t4320.html
Technical docs: http://www.inel.de/prod_ddc.htm
There are two ways to adjust a heating slope according to the outdoor T °
- By calculation
- at taton
at first glance, these parameters resemble the slope coefficient and the differential
it would be nice to put a picture of the regulator + make + model
Technical docs: http://www.inel.de/prod_ddc.htm
There are two ways to adjust a heating slope according to the outdoor T °
- By calculation
- at taton
at first glance, these parameters resemble the slope coefficient and the differential
it would be nice to put a picture of the regulator + make + model
0 x
"Consumption is similar to a search consolation, a way to fill a growing existential void. With, the key, a lot of frustration and a little guilt, increasing the environmental awareness." (Gérard Mermet)
OUCH, OUILLE, OUCH, AAHH! ^ _ ^
OUCH, OUILLE, OUCH, AAHH! ^ _ ^
-
- Similar topics
- Replies
- views
- Last message
-
- 3 Replies
- 1151 views
-
Last message by Lanig22
View the latest post
10/03/24, 18:51A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 27 Replies
- 23269 views
-
Last message by Jean-Jacques
View the latest post
06/03/15, 22:25A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 8 Replies
- 14030 views
-
Last message by the middle
View the latest post
31/05/07, 08:12A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
Back to "Heating, insulation, ventilation, VMC, cooling ..."
Who is online ?
Users browsing this forum : No registered users and 205 guests