Hellooo!
I am new to pantomania and already contaminated!
To get started, I am looking for a pantone owner - operational or not - who lives not far from home.
I am located between Bordeaux and Saintes, south Poitou Charente.
Even if you're not next door, I'm very curious!
Merciiiii
Pantone engine in Southwest Region
-
- I discovered econologic
- posts: 2
- Registration: 07/12/06, 18:37
- Location: Poitou-Charente South
Concrete research
Hellooo!
I am new to pantomania and already contaminated!
To get started, I am looking for a pantone owner - operational or not - who lives not far from home.
I am located between Bordeaux and Saintes , south Poitou Charente.
Even if you're not next door, I'm very curious!
Merciiiii
I am new to pantomania and already contaminated!
To get started, I am looking for a pantone owner - operational or not - who lives not far from home.
I am located between Bordeaux and Saintes , south Poitou Charente.
Even if you're not next door, I'm very curious!
Merciiiii
0 x
-
- I discovered econologic
- posts: 1
- Registration: 07/07/07, 23:20
- Location: mountains of Lacaune (81)
Hello everybody
In recent years I know the Pantone system, I missed time to participate in forums, follow them as closely as possible and above all technically apply the thing.
I would like to be more active today.
I have tools and equipment to equip: tractor agri, forest tractor, 4x4 who stinks, motorcycle (?).
I live in the South Tarn as RPSantina and Gérald and will like to meet nice amateurs, whether they are enlightened or not.
See you soon
In recent years I know the Pantone system, I missed time to participate in forums, follow them as closely as possible and above all technically apply the thing.
I would like to be more active today.
I have tools and equipment to equip: tractor agri, forest tractor, 4x4 who stinks, motorcycle (?).
I live in the South Tarn as RPSantina and Gérald and will like to meet nice amateurs, whether they are enlightened or not.
See you soon
0 x
Hello Bouli, and welcome to forumin your area, there is Crispus.
There was also: at Fenton
16190 Deviat
PMC Pantone training course
by Association Aubépine
http://www.laubepine.com
+05 (45)64 17 69 XNUMX XNUMX
with Mr Schmit
But I do not know what become of him ...
I'm not yet in practice, I'm in Bordeaux.
There was also: at Fenton
16190 Deviat
PMC Pantone training course
by Association Aubépine
http://www.laubepine.com
+05 (45)64 17 69 XNUMX XNUMX
with Mr Schmit
But I do not know what become of him ...
I'm not yet in practice, I'm in Bordeaux.
0 x
-
- I discovered econologic
- posts: 3
- Registration: 08/05/07, 13:51
Hello,
the link on hawthorn.com is dead, I have not tried the phone yet.
I am also looking for people who have one or more pantone in operation, to show my parents and an uncle, who still doubt a little;)
The region is from montauban, tarn-et-garonne, to albi, in the tarn, via caussade in t-and-g.
Uncle would have for his diesel car, us for one or two cars, a mower self-reach, a mini-excavator and a tractor.
It seems that there are people on Montauban. It takes us an hour to get there, so we can shine around, so if you're in the area, please send a mp
the link on hawthorn.com is dead, I have not tried the phone yet.
I am also looking for people who have one or more pantone in operation, to show my parents and an uncle, who still doubt a little;)
The region is from montauban, tarn-et-garonne, to albi, in the tarn, via caussade in t-and-g.
Uncle would have for his diesel car, us for one or two cars, a mower self-reach, a mini-excavator and a tractor.
It seems that there are people on Montauban. It takes us an hour to get there, so we can shine around, so if you're in the area, please send a mp
0 x
-
- I learn econologic
- posts: 18
- Registration: 01/12/07, 17:09
- Location: Gironde - Entre deux mers
Well I'm new to the site, but it's been over a year that I think about doping. I see that Citro and pyvesd are around! I'm at Creon- Between two seas!
I gathered the necessary parts for mounting a reactor on my 205 gasoline ... But I'm looking for someone who can support me for welding ... For me it's THE problem ... otherwise I l would have already mounted my reactor ...
That's where I am. Can be a bit like you Citro? So guys do not hesitate to signal me, we certainly have interesting things to say or do!
I gathered the necessary parts for mounting a reactor on my 205 gasoline ... But I'm looking for someone who can support me for welding ... For me it's THE problem ... otherwise I l would have already mounted my reactor ...
That's where I am. Can be a bit like you Citro? So guys do not hesitate to signal me, we certainly have interesting things to say or do!
0 x
-
- I learn econologic
- posts: 18
- Registration: 01/12/07, 17:09
- Location: Gironde - Entre deux mers
Login
By the way for Christophe and the others:
I am Matthieu LAMBRY
From Saint-Léon, Gironde, France.
I have some theoretical knowledge about internal combustion engines and I'm not afraid to put my hands in the kitchen. I am not an expert but I can learn. I am ready to invest time and move in the southwest quarter!
As I said in my previous post-it, I'm ready to go to the realization on my personal vehicle because I have most parts, but I need a welder!
A word, if anyone on this forum to this type of equipment (oxy-acethylene post or better TIG) and the skills required ... I will come to him with pleasure ... take a few welding lessons, for a salary ... anything is possible! I am a good student!
I am waiting for your reactions
I am Matthieu LAMBRY
From Saint-Léon, Gironde, France.
I have some theoretical knowledge about internal combustion engines and I'm not afraid to put my hands in the kitchen. I am not an expert but I can learn. I am ready to invest time and move in the southwest quarter!
As I said in my previous post-it, I'm ready to go to the realization on my personal vehicle because I have most parts, but I need a welder!
A word, if anyone on this forum to this type of equipment (oxy-acethylene post or better TIG) and the skills required ... I will come to him with pleasure ... take a few welding lessons, for a salary ... anything is possible! I am a good student!
I am waiting for your reactions
0 x
-
- I learn econologic
- posts: 18
- Registration: 01/12/07, 17:09
- Location: Gironde - Entre deux mers
Apart from the time of course, I consider that WELDING is the main problem of pantone experimentation because even if we all have a little tinkering at home ... only those who have the equipment to solder can start to toy and to try some montages ...
And you Citro, where are you of your project? If you had time, would you already be setting up your reactor?
As for me, time, I can always clear ... like 1 day by fortnight ... finally subject to variation.
By the way, to what extent can you diposer an oxy-acetylene station?
PS: by the way Saint-Léon where I live is 20km from home, behind Creon (La Sauve).
And you Citro, where are you of your project? If you had time, would you already be setting up your reactor?
As for me, time, I can always clear ... like 1 day by fortnight ... finally subject to variation.
By the way, to what extent can you diposer an oxy-acetylene station?
PS: by the way Saint-Léon where I live is 20km from home, behind Creon (La Sauve).
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 6 Replies
- 8988 views
-
Last message by denis
View the latest post
08/07/19, 15:09A subject posted in the forum : Water injection in engines: montages and experiments
-
- 5 Replies
- 13452 views
-
Last message by Flytox
View the latest post
06/11/17, 23:41A subject posted in the forum : Water injection in engines: montages and experiments
-
- 6 Replies
- 11284 views
-
Last message by gildas
View the latest post
30/03/17, 09:10A subject posted in the forum : Water injection in engines: montages and experiments
-
- 27 Replies
- 30242 views
-
Last message by chatelot16
View the latest post
31/07/16, 11:00A subject posted in the forum : Water injection in engines: montages and experiments
-
- 3 Replies
- 8664 views
-
Last message by jrneco
View the latest post
11/03/16, 20:29A subject posted in the forum : Water injection in engines: montages and experiments
Back to "Water injection in the engines: the assembly and experimentation"
Who is online ?
Users browsing this forum : No registered users and 110 guests