Hello,
I found a sectoral motor garage door, but they are all white (except the most expensive)!
Is it possible to paint a sectoral garage door in vinyl?
If yes, what type of paint should be used?
The thank you box
Food
To paint a garage door in vinyl?
vinyl door
take on a rag of the product to remove the nail polish
or acetone do a test on the edge of the cloth holder well
wet then scrape with a fingernail if the surface looks
a little soft you can pass your cloth over the whole door and a
layer of product from the other message then from acrylic to water
from casto
if the vinyl remains hard with acetone a light sanding over the whole
surface an owatrol layer then any paint if
possible light color because of the sun
or acetone do a test on the edge of the cloth holder well
wet then scrape with a fingernail if the surface looks
a little soft you can pass your cloth over the whole door and a
layer of product from the other message then from acrylic to water
from casto
if the vinyl remains hard with acetone a light sanding over the whole
surface an owatrol layer then any paint if
possible light color because of the sun
0 x
-
- Grand Econologue
- posts: 848
- Registration: 19/11/09, 13:24
in the long term painting such a door, whatever the technique chosen, is not durable, especially since the chosen shade is dark ... when the paint is going to peel, it will be horrible and very difficult to redo properly: in my opinion must forget and keep the white shade which is not chosen by chance (resistance to the sun)
just my 2 cent ...
just my 2 cent ...
0 x
Back to "Heating, insulation, ventilation, VMC, cooling ..."
Who is online ?
Users browsing this forum : No registered users and 203 guests