Vegetable oil burner boiler ball

[upmert]

Hello Mr the ball I will make you more detailed photos as soon as the burner is shutdown.

[the boulle]

okay!! Great

[upmert]

here are other pictures:

the fryer

my 200l tank 2 weeks of autonomy to heat a house of 140 square meters at 20 °

and the compressor

As soon as I dismantle the burner I will give you detailed photos.
Otherwise he has been walking for 3 weeks by car,
and twice in safety (1 time compressor hose dislodged and 1 other time but I did not understand why and when I pressed the button on the control box the burner started again).

[the boulle]

you have no fouling of your nozzle?

oil your fridge motor from time to time ...

200l / 140m² its rest correct for 10 days

Finally it depends on the climate at home ...

[upmert]

for the compressor no worries I him but oil regularly but for the inner nozzle cleaning every three days or so (it's a bit like terracotta around the nozzle but there is not much)

200l for 14 days house not insulated (climate in Normandy)

[the boulle]

with the savings made compared to fuel oil, you can isolate ...

you can try to run the fridge motor directly too, relay instead of air ev, you should have more pressure, good ... if everything is going well ...

[upmert]

I tried but too much pressure
I'm going to take my burner apart on Monday and take pictures

[upmert]

Three days of operation is a little more dirty than usual



here is the burner disassembled

[the boulle]

lut

ha yes, you totally turned the injection line is the deflector turbulator!

that's the problem, the clogging of the nozzle ... not simple ...

in any case great,

it would be fraudulent for your nozzle to blush, so that it does not clog, may be to put a bigger tube around the nozzle so that it cools less ...

[jonule]

Hello,
how do you clean
gas torch or toothbrush? =)