the first calculation was with a motor running with a synchronicity speed at 1480 rpm = 17µ in fact I found one which runs at 980 rpm synchronicity speed and that gives me 23.63µ the permanent motor condos on the market in capacity have 20µ , 22µ, 25µ taking the 25µ I am at 1.37µ at ...

excuse me the technical sheet did not follow the post 25 µ Farrat with lugs In stock available Description: Ref: Capacitor-permanent-mkp25co 25 µF with lugs dimension 40x93 type MKP 25 capacitor for electric motors Plastic case.Fixing screw with nut. Features: Capa ...

http://www.abm-outillages.com/Boutique/ ... rcosse.jpg
I found this one what do you think
fredo 24

I read on several articles that the condos once he had
self excited generator should be cut off
overheating and possibility of explosion of condos
true or false,?
FREDO24

Calculation Value of the Capacitors to Transform an Asynchronous Motor into an Asynchronous Generator Known Elements Motor Cosine 0,84 0,84 Synchronism Speed ​​950 950 necessary to know what it is! Rotation speed 920 920 Nominal voltage 220 220 Power in Watts 4500 4500 amperage in 220 ...

yes I have just redone the calculations I get 17µ I want to increase the low rotation of the motor by 20µ (920tm has a direct influence on the calculation of the three-phase asynchronous motor of 4.5kva in 220vlt cos 0.84 920t mn self excited by condenser mounted on a 3 phase bucket wheel (hydraulic) ...

ok
so if only for electric heating no need for a regulator?
each phase directly at the exit of each condo?
FREDO 24

http://www.priceminister.com/offer/buy/ ... nformation
I found this one, can that be enough for you?
fredo 24

https://www.econologie.info/share/partag ... Jmvn95.JPG
the wheel begins to integrate into the environment
after the low water readings it can run 10 months out of 12 24 hours a day
and summer 12 hours a day
fredo

the motor is three-phase 220v 3 star condo 10µ
1000w to 1200w output per phase
we pose the gegene this week
what kind of voltage regulator to put 1 per phase
shema or idea of ​​recuperation? https: //www.econologie.com/fichiers/partager2/1297147217hGiOGn.JPG
THANK YOU
fredo24