Plan boiler system Vigas wood log 25S

[jc-tergal]

No need for 2 entries and 2 balloon outputs and all these valves ... because for optimum operation of your boiler while heating and recharging your 1000L balloon you need:

an inlet to the balloon with a JUNCTION towards the circulator / 3changes, and likewise an outlet of the balloon to the boiler with a JUNCTION on the return of the radiators.

This is the 3 channel valve that will control the priority direction of hot water from the boiler and / or the balloon.

Thank you for the comments, except that if you can make me a drawing because I understand nothing

I will slowly test. Here I try to understand basic things ...

And thanks to the one who integrated the photos on the post rather than the links

[ulyssesourd]

here is the diagram
https://www.econologie.info/share/partag ... kwXQWQ.JPG

[djangoe]

Hello, hello to you. Glad your installation works. I hope my documents have served you well.
I agree with the opinions above and can tell you from experience (since I have the same boiler) that the saving of wood is significant with the use of the room thermostat. I easily save 30 to 40% of wood

[xavbav]

Hello everyone, and bravo JC because it's not a simple matter of lying ball.
I agree with the ulyssourd diagram, no need to cross the ball before going to the radiators, but it is true that some constructor diagrams are made in this way, I do not see the point of it. ..
Anyway, it is sure that you will need a little time to make all this work with the "little onions" (primary and secondary draft, 3-way valves, circulators, boiler programming ...) so courage.
Me, I still have a little time to cogitate my instal because at solarbayer are out of stock on the buffer balloons .. the balls, it's already been 5 weeks that everything is ordered and I think I will have as much to wait .. .but the torch has already raged .....

@+

[wading]

Hello

I bought the same boiler but at solarbayer and the manual is in German, you would not have a technical manual in French ??

[xavbav]

Hello
no, not in french but in english..if you are interested?
Do you already have yours?
@+

[manitou22]

This is the 3 channel valve that will control the priority direction of hot water from the boiler and / or the balloon.

Hi,
ulyssesourd, can you specify how your three-way valve is controlled (type of regulation, on which boiler, outside temperature?)
please
A+

[turbozender]

Hello everyone


I plan to buy the same kit on ebay but which is 300 euro more + 250 delivery

where did you buy your boiler at this price?



the question that has nothing to do but ...

my boiler room is away from the house and and access from the garden (and you seemingly to the cellar
how do you fit a 430 kg boiler in there?

please

[erry]

Good morning all!!
I rather agree with the scheme of ulyssesourd although one or two things bother me but its not going to be death !!
to regulate your mixed circuit there is http://cgi.ebay.fr/REGULATION-electroni ... 8001r20365
and a bit cheaper in Germany
http://cgi.ebay.de/Viessmann-Novamatik- ... 240%3A1318
you may just have to opt for a mixing valve from viessmann

[turbozender]

so where can we find this boiler at this price?