Hello After 6 years of good service I sold my Férroli Sun P7, I broke my piggy bank (approx 3500 €) and I bought a BMAX ROUND 25 kit. Advantages: - The little magic button to turn the worm screw. - The bottom door for the ash pan. My problem: - The bmax burner is still running ...

Hi, I created this post in November 2012, since that date I have been using the Ferroli Sun P7 burner, it has melted a little on the tip, I have never touched the setting, we should reread all the posts. I recall that I am taking over with PAC 14 kw dedietrich from 2007, electric boiler 9kw from ...

hi Excuse me for the late reply Look at the instructions on the last page on the right (Zoom), there is a 3.15 Ampere fuse it is just above the input of the power supply (A, LN) a small gray tab to pull https://www.econologie.com/fichiers/partager3/1354205483bNkXsl.pdf fuse on ...

Hello About 5 years since opening this post and I still have my Sun P7, this morning 6 o'clock no heating, the current meter had tripped, I put the power back on, still no heating, boiler indicator light on , no liquid crystals on the Sun p7, of course tempo e ...

Hi A priori, it's a Polish burner (instructions in Polish only), I don't know how your boiler is but it's pretty big to fit. on google i found its (not looking great) http: //forums.futura-sciences.com / troubleshooting / 548645-own-a-pellet-burner-ecofire-24kw.html Should be done ...

Hello
I am a user of the Sun P7, I rather use this system as part of a heat pump with EDF tempo counter, I am starting my second season, I am not getting full.

It should be seen at the price level, the sun P7 kit is around 1300 € I don't know how much the B max costs.

hello thank you both for the info I just dismantled my bubbler, there is also limestone, less but there is, so if there is limestone it is because its heating, therefore I wonder what temperature forms limestone. I resized my axis to 16.5 mm for a 20 mm tube, che ...

hello I improved the tightness of my bubbler to have a better joint plane, I cut a 5 mm thick washer and re-drilled 7 holes of 1.5 in the tube for the air inlet. https://www.econologie.com/fichiers/partager3/1376766421HuPtcS.jpg https: //www.econologie.com/fichiers/partager3 / ...

good evening flytox thanks for the quick responses. I spoke with a friend this morning he told me that out of the bubbler I had wet steam, but out of the reactor I had to have dry steam, so its best to go from the bubbler directly to the inlet. For the soup (rather ...

hello everyone In April I redid not very conclusive tests I went down to 12 l. here are my photos mounted and after disassembly https://www.econologie.com/fichiers/partager3/1374570611FeXBAh.jpg https://www.econologie.com/fichiers/partager3/1374570698xJu0B5.jpg https://www.econologie.co ...