Hello, while renovating a workshop, I would like to add lighting: a switch and a lamp. For a practical question, I would rather bring from a phase and neutral circuit breaker into the switch, and bring the neutral from this switch to the bulb and the phase that will be cut ...

Hello everyone, and yes, a few years later I come back because today I made a discovery !!! My brother-in-law has an Okofen like me, (but a last generation installed 2 years ago) I ask him to take a look, because he has a room thermostat like me. Well, my problem with the ...

Hi Thierry, I've also had problems with my room sensor for 6 years, I had to give up trying to find a solution: we tried everything: change the sensor, the control box ..... Try to see if you too have the same problem as me: if I turn the dial to the right (+) in ...

Thank you Dirk !!

but if someone can confirm ....

Is your boiler recent?

Hello everyone, a quick question. My 6 year old Okofen had a problem: the 3V valve was showing weird signs, noises, then stayed open without wanting to close. Verdict: the external box of my Okofen (on which are connected all the cables of probes, circulator, valve ...) had a / ...

@ Did67 - on ^ hoto 2, the measured temperature therefore goes to 18,5 ° (while in reality, it must always be at 19,5 ° since it could not really move!) - the setpoint, for its part, remains at 19,5 ° (while we are in forced lowered mode: how much is your lowered temperature setpoint ???) No no, su ...

Thank you Did67, I want to accept that I don't understand anything, (that's why I'm asking the specialists !!), but I still manage to read what is written on the regulator, between instructions and measured. and I thought I was clear. Apparently not !! I'll do it again with photos taken at ...

that's crazy !!! how can one imagine finding pieces of balladeuse, screwdriver ... at home, I ask myself the question twice before entering the silo, and I check if I have no stone under the shoes, I I even changed my shoes on a rainy day so as not to bring sand, ...

@ Diams38: yes yes, the control responds well to the button of the indoor sensor: live test this evening: actual temperature 19.5. Dial on the 3rd point on the right to correspond to reality and I don't touch it anymore !! - auto: it follows the programming: I read on the room temperature control: 19.5 - forced operation ...

OOOOps !! fault !!!

my probe is the same model as you Christina86