Hello

if I use pozzolan?

if I take a different volume like a plastic box to increase the exchange surface?

if I oversize the blower volume? like 300-400mcubes / hour

I know I'm hanging on ............

ok

Why?

no possibility to optimize?

ok

Why?

if not the best material ......... what to use?

I imagine that it is necessary to wait for a maximum saturation to then have a runoff .............

I hope a mechanical effect of saturation the balls being very hydrophilic ..........

it is winter and the results are relatively good ......... I cover and I have a dehu at 400 € which works almost permanently I redo the facade in spring which is not at all breathable with its coating of the 60s in cement as I work with the economy I envisaged a dehum which consumes ...

[/ quote] Alternative Low Teak with less energy! In winter, we have cold outside air to cool a metal plate and cause thermal shock. The colder it gets, the higher the yield! : mrgreen: Don't forget to defrost [/ quote] I'm interested or look for? references ...

confuse me? simply do not consume at EDF simply by running during the day and therefore without an inverter if I wanted to set up a PV installation to produce there I would complicate my life and anyway it is a professional room, put 220 in a nearby wet room of a basin ...

Hello good I think my subject is not too exciting or so we have said everything and I can imagine that there is nothing to say, however I try one last time here is the diagram of the ventilation that I am considering it remains in a closed circuit so as not to lose calories, it uses the relative cold of ...

Bonsoir


does anyone know about SolarVenti products?

photovoltaic ventilation

please