Garden irrigation pump with washing machine?

[belladonna]

Hello, the ideal would be to make the pump submersible with acrylic resin as in the video of my penultimate message
or some other means of sealing the motor and the electrical parts in order to be able to put it in water

no, I'm not having fun with 220v in water, even if it was sealed, in addition, depending on the time of use, it heats up
my pump is in a hole (weathertight and ventilated) lower than the pool water and has been for 5 years

[oli 80]

Hi everybody,

looks like acrylic resin is starting to get hit in the world

or how to make a homemade submersible pump

[oli 80]

Hi everybody,

here is a dishwasher pump used for watering

disassembly of the dishwasher, luckily on this model the cycling pump and the drain pump are mounted separately, in other dishwasher models the two pumps are attached to the same block, less practical

[oli 80]

Hi everybody,
here is a modification of a washing machine pump to make it more powerful

[oli 80]

Hi everybody,

I know it's almost the end of the year holidays that are approaching
but here's an idea to end the year well

I linked one or two videos in previous posts where they use epoxy resin to seal washing machine pumps to make them submersible, but resin costs

then as another means, a heat-shrink envelope that is used to seal batteries

to see and test, good DIY for spring

[Obamot]

Ah, suddenly with the AD hoc detergent, the gray water that comes out of the washing machine is used for watering... Suddenly we can extend the recovery to a broken down washing machine, which still turns on, but which no longer turns, and where you just have to change the big 3-roros condo which serves as a primer for the motor (as a result it gives a second life to the machine... And you avoid dismantling the pump)

[oli 80]

Hi everybody,

here is the use of a dishwasher pump for watering and other uses

[oli 80]

Hi everybody,

here is another model of dishwasher pump with 2 outlets

just plug one

[oli 80]

Hi everybody

for your pond or garden watering

[izentrop]

I hope for these DIYers that they have good ground and that their connections are protected by a 30 mA differential. Didn't see a ground wire