Combined wood baby 1130 the motor blows the weights of my electric meter

And if they were repairing rather than throwing and change? Rediscover the pleasure of the repairs yourself. How to diagnose a problem or find spare parts? Repair itself is way to save money generally!
pascaldubord
I learn econologic
I learn econologic
posts: 20
Registration: 26/03/21, 17:44
x 3

Combined wood baby 1130 the motor blows the weights of my electric meter




by pascaldubord » 26/03/21, 17:58

hello everyone I have a baby && "wood combination which I have been using for several months. Yesterday when I turned on the engine it started to start and the leads jumped. I tried again same result. this morning I tried to clean the electric wires a little before then restart and the weights jumped directly. I will try to post a photo of the electric box but am no more gifted in computers than in electricity so it may take some time!
merci pour votre aide
0 x
pascaldubord
I learn econologic
I learn econologic
posts: 20
Registration: 26/03/21, 17:44
x 3

Re: combine wood baby 1130 the motor blows the weights of my electric meter




by pascaldubord » 26/03/21, 18:14

20210326_162500.jpg
8
20210326_162510.jpg
20210326_162528.jpg
chment]
Attachments
20210326_162703.jpg
0 x
User avatar
GuyGadeboisTheBack
Econologue expert
Econologue expert
posts: 14763
Registration: 10/12/20, 20:52
Location: 04
x 4283

Re: combine wood baby 1130 the motor blows the weights of my electric meter




by GuyGadeboisTheBack » 26/03/21, 18:22

Hi. I think we should already disconnect everything, unravel, and redo connections without twisting the wires. Afterwards, it may not be enough, but already it would be a good start. The capacitor may be dead. Another track. Dirty coals can also cause certain "malfunctions".
http://www.vft47.fr/medias/files/m2s5s5 ... moteur.pdf
0 x
User avatar
Macro
Econologue expert
Econologue expert
posts: 6426
Registration: 04/12/08, 14:34
x 1586

Re: combine wood baby 1130 the motor blows the weights of my electric meter




by Macro » 26/03/21, 19:35

this motor is an asynchronous motor ... It has no carbon ...
0 x
The only thing safe in the future. It is that there may chance that it conforms to our expectations ...
User avatar
Exnihiloest
Econologue expert
Econologue expert
posts: 5365
Registration: 21/04/15, 17:57
x 660

Re: combine wood baby 1130 the motor blows the weights of my electric meter




by Exnihiloest » 26/03/21, 19:45

If it is indeed the pellets which jump and not the differential, it is that there is a short circuit. In the worst case, it is the winding which has burnt out (normally, it leaves an odor). A mild case would be a short circuit in the capacitor, which is easy to change. The most benign would be a short juice between wires, but it must be seen, maybe because of the corrosion. There remains the possibility that the motor mechanically blocks for one reason or another, a phenomenon which causes an overcurrent.
You have to unplug and see it all with an ohm-meter.
0 x
User avatar
GuyGadeboisTheBack
Econologue expert
Econologue expert
posts: 14763
Registration: 10/12/20, 20:52
Location: 04
x 4283

Re: combine wood baby 1130 the motor blows the weights of my electric meter




by GuyGadeboisTheBack » 26/03/21, 19:48

Macro wrote:this motor is an asynchronous motor ... It has no carbon ...

Well that's already a problem eliminated.
0 x
User avatar
Remundo
Moderator
Moderator
posts: 15940
Registration: 15/10/07, 16:05
Location: Clermont Ferrand
x 5162

Re: combine wood baby 1130 the motor blows the weights of my electric meter




by Remundo » 26/03/21, 19:56

an electrical box not very nice.

but if you have an earth leak ... 30mA is enough to blow up.

frankly this case deserves to be redone, full of rust and threads in bad condition.

I'm not sure if the problem is with the engine.
2 x
Image
sicetaitsimple
Econologue expert
Econologue expert
posts: 9761
Registration: 31/10/16, 18:51
Location: Lower Normandy
x 2633

Re: combine wood baby 1130 the motor blows the weights of my electric meter




by sicetaitsimple » 26/03/21, 20:05

What do you mean by "blow up the pellets"?
Has your general circuit breaker opened?
Or a 30mA differential circuit breaker upstream of your machine?
Or really "leads", or a circuit breaker specific to the power supply of your machine?
0 x
pascaldubord
I learn econologic
I learn econologic
posts: 20
Registration: 26/03/21, 17:44
x 3

Re: combine wood baby 1130 the motor blows the weights of my electric meter




by pascaldubord » 26/03/21, 20:28

Exnihiloest wrote:If it is indeed the pellets which jump and not the differential, it is that there is a short circuit. In the worst case, it is the winding which has burnt out (normally, it leaves an odor). A mild case would be a short circuit in the capacitor, which is easy to change. The most benign would be a short juice between wires, but it must be seen, maybe because of the corrosion. There remains the possibility that the motor mechanically blocks for one reason or another, a phenomenon which causes an overcurrent.
You have to unplug and see it all with an ohm-meter.





Uh sorry, but it is the differential that jumps! Oops
0 x
pascaldubord
I learn econologic
I learn econologic
posts: 20
Registration: 26/03/21, 17:44
x 3

Re: combine wood baby 1130 the motor blows the weights of my electric meter




by pascaldubord » 26/03/21, 20:34

Remundo wrote:an electrical box not very nice.

but if you have an earth leak ... 30mA is enough to blow up.

frankly this case deserves to be redone, full of rust and threads in bad condition.

I'm not sure if the problem is with the engine.



Yes it seems to me that the problem comes from this box but I do not really know how to approach the problem.
Afraid of doing stupid things!
0 x

Back to "failure, troubleshooting and repair: repair yourself? "

Who is online ?

Users browsing this forum : No registered users and 68 guests