Hello
I bought the tronxy x5sa 500 pro and the upgrade kit. I've read lots of good comments on it. Well after 2kg of melted filament I couldn't print anything. Why ? Because the extruders don't work properly. After a return trip of filament or even just a stop the filament is damaged and no longer goes up, the extruder blocks the filament. And I'm talking in one color, I can't even imagine two-tone.
No matter the settings through the software or the setting of the extruder wheel the result and the same.
Anyone got a solution?
Thank you
tronxys x5sa pro 500 review: filament stuck in the extruder
-
- Moderator
- posts: 79356
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11059
Re: Review tronxys x5sa pro 500
You're lucky, I have one...without the upgrade kit (what is it?)...
Start by reading what I think here: 3d-printers / tronxy-x5sa-500-pro-improvement-z-axis-how-to-paste-a-toothed-belt-t16537.html
The big problem is the assembly: it is absolutely necessary that the chassis is well mounted square otherwise no shape will be good... There is even an error in the instructions: if you follow the steps it is impossible to assemble. ..finally I mounted mine more than 18 months ago...
Post some pics of yours and your worries here?
I also had some filament "machining" in the extruder if that's what you're thinking...
Start by reading what I think here: 3d-printers / tronxy-x5sa-500-pro-improvement-z-axis-how-to-paste-a-toothed-belt-t16537.html
The big problem is the assembly: it is absolutely necessary that the chassis is well mounted square otherwise no shape will be good... There is even an error in the instructions: if you follow the steps it is impossible to assemble. ..finally I mounted mine more than 18 months ago...
Post some pics of yours and your worries here?
I also had some filament "machining" in the extruder if that's what you're thinking...
0 x
Do a image search or an text search - Netiquette of forum
-
- Moderator
- posts: 79356
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11059
Re: Review tronxys x5sa pro 500
Otherwise you can also read this topic on tests on different filaments: 3d-printers / test-best-filaments-3d-printers-2020-pla-pla-tpu-petg-carbon-t16592.html
Some filaments stuck more in the extruder than others...
The printing speed plays on the blocking of the filaments, try to reduce it to around 50-60 mm/s... and increase the nozzle temperature a little...
Some filaments stuck more in the extruder than others...
The printing speed plays on the blocking of the filaments, try to reduce it to around 50-60 mm/s... and increase the nozzle temperature a little...
0 x
Do a image search or an text search - Netiquette of forum
-
- Similar topics
- Replies
- views
- Last message
-
- 35 Replies
- 30186 views
-
Last message by Christophe
View the latest post
23/03/21, 14:35A subject posted in the forum : 3D printers and 3D print: machines and technologies, hardware, software, use and optimization
-
- 20 Replies
- 36286 views
-
Last message by thedgils
View the latest post
09/05/23, 16:24A subject posted in the forum : 3D printers and 3D print: machines and technologies, hardware, software, use and optimization
Who is online ?
Users browsing this forum : No registered users and 33 guests