Envoy: 3D printer, embossed revolution!

Forum dedicated to 3D printing: 3D printing technologies (fdm, lcd, sla ...), hardware, software, slicers, settings, use, database, model exchange, tips and tricks, optimization, exchange of experiences...
Christophe
Moderator
Moderator
posts: 79117
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10973

Envoy: 3D printer, embossed revolution!




by Christophe » 07/03/14, 10:38

Broadcast last night, a special report sent on 3D printing: http://www.france2.fr/emissions/envoye- ... 4224108_F2

As a reminder, the store of your forums favorites, offers a very accessible: https://www.econologie.com/shop/imprimante-3d-c-87.html
0 x
slowrage
I learn econologic
I learn econologic
posts: 13
Registration: 12/02/04, 21:51

Thank you




by slowrage » 09/03/14, 04:11

Thank you for the link !

I hadn't realized the potential of these little wonders.

Indeed there is an econological aspect to print replacement parts at home. (you still have to have the model because not everyone is a 3D designer ^^)

Severin
0 x
Christophe
Moderator
Moderator
posts: 79117
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10973




by Christophe » 17/03/14, 13:32

Small report on the JT of FR2: http://www.youtube.com/watch?v=5d2oZX_Z2KY (other info than in the special report sent)
0 x
User avatar
Dominique14
I discovered econologic
I discovered econologic
posts: 3
Registration: 12/07/14, 11:55




by Dominique14 » 12/07/14, 11:59

Very interesting this report, quite astonishing the moment when a replica of the tintin rocket is printed. Does this symbolize the whole issue of intellectual property?
0 x
User avatar
sen-no-sen
Econologue expert
Econologue expert
posts: 6856
Registration: 11/06/09, 13:08
Location: High Beaujolais.
x 749




by sen-no-sen » 23/09/14, 15:38

0 x
"Engineering is sometimes about knowing when to stop" Charles De Gaulle.

Go back to "3D printers and 3D print: machines and technologies, hardware, software, use and optimization"

Who is online ?

Users browsing this forum : No registered users and 39 guests