The 3D printer from the store is available at the presale for delivery in October 2013: https://www.econologie.com/shop/impriman ... p-511.html plus a launch promo (and always Franco de Port)
There is about 15 to 20h mounting.
I open this topic for user feedback on the hardware and configuration of the K8200.
For the use and exchange of 3D models other topics will follow here: https://www.econologie.com/forums/imprimante ... -vf95.html
Printer 3D K8200: Installation, configuration, calibration ...
-
- Moderator
- posts: 79332
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11046
Printer 3D K8200: Installation, configuration, calibration ...
Last edited by Christophe the 16 / 03 / 14, 13: 24, 1 edited once.
0 x
Do a image search or an text search - Netiquette of forum
-
- I discovered econologic
- posts: 6
- Registration: 12/08/13, 23:34
-
- Moderator
- posts: 79332
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11046
Super genesis2546, welcome and thank you for this return!
1 day is what the representative Velleman told me ... if the record does 700 pages actually ... but there are a lot of pictures !! each step is detailed, so to make a mistake you have to want it ...
ps: we have our own web host: https://www.econologie.com/forums/comment-me ... t1176.html
1 day is what the representative Velleman told me ... if the record does 700 pages actually ... but there are a lot of pictures !! each step is detailed, so to make a mistake you have to want it ...
ps: we have our own web host: https://www.econologie.com/forums/comment-me ... t1176.html
Last edited by Christophe the 11 / 03 / 14, 15: 01, 1 edited once.
0 x
Do a image search or an text search - Netiquette of forum
-
- I discovered econologic
- posts: 6
- Registration: 12/08/13, 23:34
-
- Econologue expert
- posts: 5111
- Registration: 28/09/09, 17:35
- Location: Isére
- x 554
Re: 3D K8200 Printer: assembly, configuration, calibration.
And besides making a set of plastic cupcakes for beautiful mom, what are you going to do with it?
0 x
-
- I discovered econologic
- posts: 6
- Registration: 12/08/13, 23:34
After...
So the printer is working properly globally!
But the heated "bed" is not very flat, not easy to adjust (fold) ...
the Z axis moving with the filtée rod, not top to improve (the motor slime a max).
Little trick for commissioning the electronic card:
Connect it to the PC with the usb cable, but without the power supply 15V and no plug ... once the PC communicates (com port), you can connect everything ...
Otherwise really top !! it's really cool to see it work.
the "repetier" program is very easy to use!
if you have any questions, I'm here ...
So the printer is working properly globally!
But the heated "bed" is not very flat, not easy to adjust (fold) ...
the Z axis moving with the filtée rod, not top to improve (the motor slime a max).
Little trick for commissioning the electronic card:
Connect it to the PC with the usb cable, but without the power supply 15V and no plug ... once the PC communicates (com port), you can connect everything ...
Otherwise really top !! it's really cool to see it work.
the "repetier" program is very easy to use!
if you have any questions, I'm here ...
0 x
-
- I discovered econologic
- posts: 6
- Registration: 12/08/13, 23:34
Hello,
good the heated "bed" was rounded! So to be able to adjust the bed as well as possible, a 5th screw has been added (in the center)!
For 3D modeling I use Inventor 2012, which export directly to .stl format.
For printing,
Repetier-Host (in French) works perfectly! the Slic3r "slicing" program (in English) allows many adjustments ... I still have to go deeper ...
one of the first piece to print is the cone for the fan ...
this is the result:
In the end it's still nice to be a handyman to mount this printer ...
good the heated "bed" was rounded! So to be able to adjust the bed as well as possible, a 5th screw has been added (in the center)!
For 3D modeling I use Inventor 2012, which export directly to .stl format.
For printing,
Repetier-Host (in French) works perfectly! the Slic3r "slicing" program (in English) allows many adjustments ... I still have to go deeper ...
one of the first piece to print is the cone for the fan ...
this is the result:
In the end it's still nice to be a handyman to mount this printer ...
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 13 Replies
- 3563 views
-
Last message by Ahmed
View the latest post
12/10/21, 09:54A subject posted in the forum : 3D printers and 3D print: machines and technologies, hardware, software, use and optimization
-
- 35 Replies
- 30148 views
-
Last message by Christophe
View the latest post
23/03/21, 14:35A subject posted in the forum : 3D printers and 3D print: machines and technologies, hardware, software, use and optimization
-
- 59 Replies
- 17068 views
-
Last message by Christophe
View the latest post
20/10/20, 12:45A subject posted in the forum : 3D printers and 3D print: machines and technologies, hardware, software, use and optimization
-
- 1 Replies
- 6343 views
-
Last message by Forhorse
View the latest post
18/08/17, 06:54A subject posted in the forum : 3D printers and 3D print: machines and technologies, hardware, software, use and optimization
-
- 7 Replies
- 9828 views
-
Last message by Obamot
View the latest post
21/10/22, 05:59A subject posted in the forum : 3D printers and 3D print: machines and technologies, hardware, software, use and optimization
Who is online ?
Users browsing this forum : No registered users and 36 guests