Well, I know, it's not a wonder....
The launcher broke, impossible to put back in place without it getting out of the way, the plastoc, it's not fantastic for that...
But, I found on ali, a compatible, not listed as, but as he looked like a (twin) brother, I tried...
https://fr.aliexpress.com/item/32354540769.html
And it goes well ... until it breaks, because it's not better than the original, "also worse" ....
Leroy merlin Sterwins pbc1-26L brushcutter launcher failure
Leroy merlin Sterwins pbc1-26L brushcutter launcher failure
0 x
hmmmmm, hmmmmmmmmmmmmm, hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhmmmmmmmmm, huh, hmmmmmmmmmmmmm.
Re: Leroy Merlin Sterwins pbc1-26L brushcutter launcher failure
I forgot, received in about 10 days.
As a brushcutter, with heavy use, we must forget.
But as an edger on a large lot, and a little more, it's not bad, for the price.
As a brushcutter, with heavy use, we must forget.
But as an edger on a large lot, and a little more, it's not bad, for the price.
0 x
hmmmmm, hmmmmmmmmmmmmm, hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhmmmmmmmmm, huh, hmmmmmmmmmmmmm.
-
- Moderator
- posts: 79323
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11042
Re: Leroy Merlin Sterwins pbc1-26L brushcutter launcher failure
You suddenly can give more than 5€ to the forum no ?
0 x
Do a image search or an text search - Netiquette of forum
Re: Leroy Merlin Sterwins pbc1-26L brushcutter launcher failure
Hello
I reactivate this thread asking if there is a video to make the change, or if it is so simple that we can do without it?
I reactivate this thread asking if there is a video to make the change, or if it is so simple that we can do without it?
0 x
- GuyGadeboisTheBack
- Econologue expert
- posts: 14931
- Registration: 10/12/20, 20:52
- Location: 04
- x 4346
Re: Leroy Merlin Sterwins pbc1-26L brushcutter launcher failure
If it's just changing the launcher, you take it apart and put the new one in place. (not very complex, 3 or 4 screws)
If it's the spring to put back, you need a little patience
and explode your fingers/hands to block the turns at each turn. (more complex, boring, but it can be done)
With a little luck, there are some tips videos that will help you avoid too much hassle.
If it's the spring to put back, you need a little patience
and explode your fingers/hands to block the turns at each turn. (more complex, boring, but it can be done)
With a little luck, there are some tips videos that will help you avoid too much hassle.
0 x
Optimists invented airplanes, parachutes pessimistic. George Bernard Shaw.
Thought personal, I understand better why the big bosses invented the golden parachute.
Thought personal, I understand better why the big bosses invented the golden parachute.
-
- Econologue expert
- posts: 13698
- Registration: 17/03/14, 23:42
- Location: picardie
- x 1516
- Contact :
Re: Leroy Merlin Sterwins pbc1-26L brushcutter launcher failure
I have this mower bought second hand (well the same one, these are not my photos https://mototracteurs.forumactif.com/t5 ... ofaucheuse). I repaired several times the launcher which was farting during a backfire.
Since I use a string wound on the pulley that you see in the second image, it always starts on the second launch, even after 2 years without turning. You still need to have the pulley that fits well .
Since I use a string wound on the pulley that you see in the second image, it always starts on the second launch, even after 2 years without turning. You still need to have the pulley that fits well .
0 x
Re: Leroy Merlin Sterwins pbc1-26L brushcutter launcher failure
Hello
Thank you for the answers, even if the history of Romanian completely escapes me, in the 1st as in the 2nd degree
Otherwise I deduce that the change is very simple since no video available, so I will try, even if it means being more careful when starting up so as not to change it every 15 days
I post photos if I'm in trouble
Thank you for the answers, even if the history of Romanian completely escapes me, in the 1st as in the 2nd degree
Otherwise I deduce that the change is very simple since no video available, so I will try, even if it means being more careful when starting up so as not to change it every 15 days
I post photos if I'm in trouble
1 x
-
- Moderator
- posts: 79323
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11042
Re: Leroy Merlin Sterwins pbc1-26L brushcutter launcher failure
No better and I am the first concerned I think...
0 x
Do a image search or an text search - Netiquette of forum
Re: Leroy Merlin Sterwins pbc1-26L brushcutter launcher failure
he was talking about the €5 you were asking for
1 x
The only thing safe in the future. It is that there may chance that it conforms to our expectations ...
-
- Similar topics
- Replies
- views
- Last message
-
- 15 Replies
- 1928 views
-
Last message by izentrop
View the latest post
14/12/23, 10:52A subject posted in the forum : Failure, troubleshooting and repair: repair yourself?
-
- 1 Replies
- 1110 views
-
Last message by Remundo
View the latest post
02/10/23, 10:46A subject posted in the forum : Failure, troubleshooting and repair: repair yourself?
-
- 2 Replies
- 1239 views
-
Last message by Christophe
View the latest post
02/10/23, 12:41A subject posted in the forum : Failure, troubleshooting and repair: repair yourself?
-
- 11 Replies
- 2796 views
-
Last message by Christophe
View the latest post
21/06/23, 12:11A subject posted in the forum : Failure, troubleshooting and repair: repair yourself?
-
- 7 Replies
- 1687 views
-
Last message by phil59
View the latest post
28/03/23, 21:21A subject posted in the forum : Failure, troubleshooting and repair: repair yourself?
Back to "failure, troubleshooting and repair: repair yourself? "
Who is online ?
Users browsing this forum : No registered users and 121 guests