NUAIR REVOLUTION'AIR Movy (MECAFER) compressor broken down which no longer exceeds 2 bars
published: 24/09/20, 13:52
My Nuair Movy compressed air compressor (bought in 2007) has not exceeded (approximately) 2 bars for a few weeks ... It was still working well in the spring, I had increased it to 8 bars, generally I did not exceed 5 -6 bars of adjustment.
There are no audible leaks (= when the compressor is stopped ... when it turns, the air is bound to go somewhere ...) ... you must not blow the circuit breaker ... Just that the bars stagnate at 2 bars ...
The pressure build-up seems to me a little slower than before ... (which raises concerns about the sealing of the piston ... certainly not really repairable ...) ...
It seems to me that I did not pay a lot of money at the time (150?), This model no longer exists and the current equivalent version is worth between 150 and 250 € on the internet ...
It was not used very much, a few tire inflation / blower cleaning ... I purged the water quite regularly.
Do you think this can be fixed? What should I first check? The pressure switch maybe?
It's a bit boring to intervene because everything is "under plastic" ...
There are no audible leaks (= when the compressor is stopped ... when it turns, the air is bound to go somewhere ...) ... you must not blow the circuit breaker ... Just that the bars stagnate at 2 bars ...
The pressure build-up seems to me a little slower than before ... (which raises concerns about the sealing of the piston ... certainly not really repairable ...) ...
It seems to me that I did not pay a lot of money at the time (150?), This model no longer exists and the current equivalent version is worth between 150 and 250 € on the internet ...
It was not used very much, a few tire inflation / blower cleaning ... I purged the water quite regularly.
Do you think this can be fixed? What should I first check? The pressure switch maybe?
It's a bit boring to intervene because everything is "under plastic" ...