Ponast KP11 boiler, screw locked

And if they were repairing rather than throwing and change? Rediscover the pleasure of the repairs yourself. How to diagnose a problem or find spare parts? Repair itself is way to save money generally!
stephane c
I discovered econologic
I discovered econologic
posts: 7
Registration: 22/05/19, 19:36
x 1

Ponast KP11 boiler, screw locked




by stephane c » 30/05/19, 18:12

hello I have the following message on my boiler "screw N ° 2 blocked" after a big cleaning nothing disturbs the screws, when I restart the machine the message comes back .. would someone have u this problem
CDT
stephane
0 x
Arnaudbzh
I learn econologic
I learn econologic
posts: 26
Registration: 29/02/20, 16:13
x 1

Re: Ponast PK11 boiler, screw blocked




by Arnaudbzh » 29/02/20, 16:17

Hello
I have the same failure my on screw 1
I changed the capacitor but its like
Thank you
0 x
Arnaudbzh
I learn econologic
I learn econologic
posts: 26
Registration: 29/02/20, 16:13
x 1

Re: Ponast PK11 boiler, screw blocked




by Arnaudbzh » 03/05/20, 00:20

Still broken down with a ponast k11 boiler
And when I change my grip with screw 1 and screw 2 its the other screw which marks screw blocked
Sounds like between the card and the outlet?
Which one has already had her?
Thank you
0 x
Arnaudbzh
I learn econologic
I learn econologic
posts: 26
Registration: 29/02/20, 16:13
x 1

Re: Ponast PK11 boiler, screw blocked




by Arnaudbzh » 03/05/20, 00:21

Arnaudbzh wrote:Still broken down with a ponast k11 boiler
And when I change my grip with screw 1 and screw 2 its the other screw which marks screw blocked
Sounds like between the card and the outlet?
Which one has already had her?
The part makes a tick can the screw hang (vs 116k red)
Thank you
Attachments
AFBCC513-E867-4F73-BC0F-32FE44EFA6B1.jpeg
0 x
Arnaudbzh
I learn econologic
I learn econologic
posts: 26
Registration: 29/02/20, 16:13
x 1

Re: Ponast PK11 boiler, screw blocked




by Arnaudbzh » 21/05/20, 14:50

stephane ca writes:hello I have the following message on my boiler "screw N ° 2 blocked" after a big cleaning nothing disturbs the screws, when I restart the machine the message comes back .. would someone have u this problem
CDT
stephane

Hello
you found the breakdown because I have the same
0 x
stephane c
I discovered econologic
I discovered econologic
posts: 7
Registration: 22/05/19, 19:36
x 1

Re: Ponast PK11 boiler, screw blocked




by stephane c » 15/09/20, 21:46

hello, I come back to the forum With a lot of delay, my boiler was repaired in November, after tests on several parts, the motherboard was changed and it works. today I did the maintenance myself I disassemble it entirely, the drive of the pellets, the worms, and all the interior or it burns nothing complicated.
without touching the motherboard of course :-)
pay attention to the very fragile flue gas temperature probe line.
it is easier to clean when the rear is to remove a lot of ash that you cannot see from the front even in the blower
16 p.m. winding up and at 30 p.m. it is started for hot water.
0 x
Arnaudbzh
I learn econologic
I learn econologic
posts: 26
Registration: 29/02/20, 16:13
x 1

Re: Ponast PK11 boiler, screw blocked




by Arnaudbzh » 15/09/20, 21:55

stephane ca writes:hello, I come back to the forum With a lot of delay, my boiler was repaired in November, after tests on several parts, the motherboard was changed and it works. today I did the maintenance myself I disassemble it entirely, the drive of the pellets, the worms, and all the interior or it burns nothing complicated.
without touching the motherboard of course :-)
pay attention to the very fragile flue gas temperature probe line.
it is easier to clean when the rear is to remove a lot of ash that you cannot see from the front even in the blower
16 p.m. winding up and at 30 p.m. it is started for hot water.


Hello
Yes me too it was the motherboard that was hs
I found no one so suddenly it's me who does the cleaning I'm going to do this weekend to be ready for can it will be cold
0 x
stephane c
I discovered econologic
I discovered econologic
posts: 7
Registration: 22/05/19, 19:36
x 1

Re: Ponast PK11 boiler, screw blocked




by stephane c » 16/09/20, 21:46

hello, Arnaudbzh you are from which region?
I ended up calling a box in Belgium very well received, which found me someone in Brittany who works for
0 x
Arnaudbzh
I learn econologic
I learn econologic
posts: 26
Registration: 29/02/20, 16:13
x 1

Re: Ponast PK11 boiler, screw blocked




by Arnaudbzh » 16/09/20, 21:53

Arnaudbzh wrote:
stephane ca writes:hello, I come back to the forum With a lot of delay, my boiler was repaired in November, after tests on several parts, the motherboard was changed and it works. today I did the maintenance myself I disassemble it entirely, the drive of the pellets, the worms, and all the interior or it burns nothing complicated.
without touching the motherboard of course :-)
pay attention to the very fragile flue gas temperature probe line.
it is easier to clean when the rear is to remove a lot of ash that you cannot see from the front even in the blower
16 p.m. winding up and at 30 p.m. it is started for hot water.

Hello
I am from the Brittany center 22480 Kerien
Hello
Yes me too it was the motherboard that was hs
I found no one so suddenly it's me who does the cleaning I'm going to do this weekend to be ready for can it will be cold
0 x
Arnaudbzh
I learn econologic
I learn econologic
posts: 26
Registration: 29/02/20, 16:13
x 1

Re: Ponast PK11 boiler, screw blocked




by Arnaudbzh » 16/09/20, 21:55

stephane ca writes:hello, Arnaudbzh you are from which region?
I ended up calling a box in Belgium very well received, which found me someone in Brittany who works for

I am from the Brittany center 22480 Kerien
0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "failure, troubleshooting and repair: repair yourself? "

Who is online ?

Users browsing this forum : gegyx and 121 guests