hello I have the following message on my boiler "screw N ° 2 blocked" after a big cleaning nothing disturbs the screws, when I restart the machine the message comes back .. would someone have u this problem
CDT
stephane
Ponast KP11 boiler, screw locked
-
- I discovered econologic
- posts: 7
- Registration: 22/05/19, 19:36
- x 1
Re: Ponast PK11 boiler, screw blocked
Hello
I have the same failure my on screw 1
I changed the capacitor but its like
Thank you
I have the same failure my on screw 1
I changed the capacitor but its like
Thank you
0 x
Re: Ponast PK11 boiler, screw blocked
Still broken down with a ponast k11 boiler
And when I change my grip with screw 1 and screw 2 its the other screw which marks screw blocked
Sounds like between the card and the outlet?
Which one has already had her?
Thank you
And when I change my grip with screw 1 and screw 2 its the other screw which marks screw blocked
Sounds like between the card and the outlet?
Which one has already had her?
Thank you
0 x
Re: Ponast PK11 boiler, screw blocked
Arnaudbzh wrote:Still broken down with a ponast k11 boiler
And when I change my grip with screw 1 and screw 2 its the other screw which marks screw blocked
Sounds like between the card and the outlet?
Which one has already had her?
The part makes a tick can the screw hang (vs 116k red)
Thank you
0 x
Re: Ponast PK11 boiler, screw blocked
stephane ca writes:hello I have the following message on my boiler "screw N ° 2 blocked" after a big cleaning nothing disturbs the screws, when I restart the machine the message comes back .. would someone have u this problem
CDT
stephane
Hello
you found the breakdown because I have the same
0 x
-
- I discovered econologic
- posts: 7
- Registration: 22/05/19, 19:36
- x 1
Re: Ponast PK11 boiler, screw blocked
hello, I come back to the forum With a lot of delay, my boiler was repaired in November, after tests on several parts, the motherboard was changed and it works. today I did the maintenance myself I disassemble it entirely, the drive of the pellets, the worms, and all the interior or it burns nothing complicated.
without touching the motherboard of course :-)
pay attention to the very fragile flue gas temperature probe line.
it is easier to clean when the rear is to remove a lot of ash that you cannot see from the front even in the blower
16 p.m. winding up and at 30 p.m. it is started for hot water.
without touching the motherboard of course :-)
pay attention to the very fragile flue gas temperature probe line.
it is easier to clean when the rear is to remove a lot of ash that you cannot see from the front even in the blower
16 p.m. winding up and at 30 p.m. it is started for hot water.
0 x
Re: Ponast PK11 boiler, screw blocked
stephane ca writes:hello, I come back to the forum With a lot of delay, my boiler was repaired in November, after tests on several parts, the motherboard was changed and it works. today I did the maintenance myself I disassemble it entirely, the drive of the pellets, the worms, and all the interior or it burns nothing complicated.
without touching the motherboard of course :-)
pay attention to the very fragile flue gas temperature probe line.
it is easier to clean when the rear is to remove a lot of ash that you cannot see from the front even in the blower
16 p.m. winding up and at 30 p.m. it is started for hot water.
Hello
Yes me too it was the motherboard that was hs
I found no one so suddenly it's me who does the cleaning I'm going to do this weekend to be ready for can it will be cold
0 x
-
- I discovered econologic
- posts: 7
- Registration: 22/05/19, 19:36
- x 1
Re: Ponast PK11 boiler, screw blocked
hello, Arnaudbzh you are from which region?
I ended up calling a box in Belgium very well received, which found me someone in Brittany who works for
I ended up calling a box in Belgium very well received, which found me someone in Brittany who works for
0 x
Re: Ponast PK11 boiler, screw blocked
Arnaudbzh wrote:stephane ca writes:hello, I come back to the forum With a lot of delay, my boiler was repaired in November, after tests on several parts, the motherboard was changed and it works. today I did the maintenance myself I disassemble it entirely, the drive of the pellets, the worms, and all the interior or it burns nothing complicated.
without touching the motherboard of course :-)
pay attention to the very fragile flue gas temperature probe line.
it is easier to clean when the rear is to remove a lot of ash that you cannot see from the front even in the blower
16 p.m. winding up and at 30 p.m. it is started for hot water.
Hello
I am from the Brittany center 22480 Kerien
Hello
Yes me too it was the motherboard that was hs
I found no one so suddenly it's me who does the cleaning I'm going to do this weekend to be ready for can it will be cold
0 x
Re: Ponast PK11 boiler, screw blocked
stephane ca writes:hello, Arnaudbzh you are from which region?
I ended up calling a box in Belgium very well received, which found me someone in Brittany who works for
I am from the Brittany center 22480 Kerien
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 1 Replies
- 5014 views
-
Last message by Doudou22
View the latest post
31/03/23, 23:55A subject posted in the forum : Failure, troubleshooting and repair: repair yourself?
-
- 1 Replies
- 5764 views
-
Last message by Doudou22
View the latest post
31/03/23, 23:46A subject posted in the forum : Failure, troubleshooting and repair: repair yourself?
-
- 10 Replies
- 8499 views
-
Last message by Christophe
View the latest post
04/01/22, 16:36A subject posted in the forum : Failure, troubleshooting and repair: repair yourself?
-
- 6 Replies
- 9122 views
-
Last message by Doudou22
View the latest post
06/08/21, 08:38A subject posted in the forum : Failure, troubleshooting and repair: repair yourself?
-
- 53 Replies
- 24780 views
-
Last message by Doudou22
View the latest post
23/09/21, 14:16A subject posted in the forum : Failure, troubleshooting and repair: repair yourself?
Back to "failure, troubleshooting and repair: repair yourself? "
Who is online ?
Users browsing this forum : No registered users and 132 guests