Page 1 on 4

Self-construction burner pellet REPLICA

published: 26/12/17, 18:13
View BP86
Hello everybody ,

Some time ago I launched myself in the Manufacture of a Pellet Burner (Largely inspired by dede021385, see: autoconstruction-and-Craft / autoconstruction-burner-granules-t12894.html)

I will try to feed as much as possible the post knowing that I made several version of my burner or rather modification
the big problem that I encounter is the rise of heat flame in the admission (problem in part resolved since)

The making :
IMG_20170722_081518.jpg
IMG_20170722_081518.jpg (113.14 KB) Viewed times 23079
IMG_20170722_081734.jpg
IMG_20170722_081734.jpg (117.04 KB) Viewed times 23079
IMG_20170723_175921.jpg
IMG_20170723_175921.jpg (122.58 KB) Viewed times 23079
IMG_20170729_172039.jpg
IMG_20170729_172039.jpg (119.86 KB) Viewed times 23079
IMG_20170722_081648.jpg
IMG_20170722_081648.jpg (112.05 KB) Viewed times 23079
IMG_20170723_175901.jpg
IMG_20170723_175901.jpg (110.36 KB) Viewed times 23079

IMG_20170723_175850.jpg
IMG_20170723_175850.jpg (123.71 KB) Viewed times 23079

IMG_20170729_172021.jpg
IMG_20170729_172021.jpg (109.21 KB) Viewed times 23079

IMG_20170730_143940.jpg
IMG_20170730_143940.jpg (410.01 KB) Viewed times 23079


Regarding the ignition it is a resistance of heat gun, it has its effect in 30 Seconds it is lit, next to a blower pipe compressed air for the evacuation of ashes in the nozzle at the end of cycle

Re: Self-construction burner pellet REPLICA

published: 26/12/17, 20:28
View BP86

Re: Self-construction burner pellet REPLICA

published: 26/12/17, 20:28
View Christophe
An insulation of the external part of the burner could be suitable maybe? Or to draw inspiration from the boiler manufacturer's schematic diagrams? KWB, OeKofen ...

I tried to relaunch dede on the subject in question a few days ago: autoconstruction-and-Craft / autoconstruction-burner-granules-t12894.html but he did not have to pass here ... It was surper what he had done, I would have liked to have news since 2014?

It may be necessary to contact him via his channel youtube ... apparently it is still active!

Re: Self-construction burner pellet REPLICA

published: 30/12/17, 21:01
View olives55
Good evening bravo BP86 for the self construction of the burner.Very soon I too go to the realization of a burner in m inspiring that of DEDE, you too and a document of the manufacturer Saint Roch boiler NOVA pellet. I start the station.

Re: Self-construction burner pellet REPLICA

published: 31/12/17, 00:35
View Christophe
Sharing the document already here, it will surely help BP !! 8)

Re: Self-construction burner pellet REPLICA

published: 05/01/18, 20:19
View olives55
text / html; charset = UTF-8
width = device-width, initial-scale = 1.0
IE = edge, chrome = 1
NOVA CK P CK-B TABLE OF CONTENTS 1. Definition of supplies, packaging Before starting the installation Description, assembly, assembly and connection
NOVA CK P CK-B TABLE OF CONTENTS 1. Definition of supplies, packaging Before starting the installation Description, assembly, assembly and connection
NOVA CK P CK-B P - PDF
website
http://docplayer.fr/thumbs/29/13442863.jpg
http://docplayer.fr/13442863-Nova-ck-20 ... -50-p.html

Re: Self-construction burner pellet REPLICA

published: 05/01/18, 20:45
View BP86
Thanks for the doc,
it is a well known pellet burner it is a termocabi I had already conducted my investigation :-)
it's a bit like the Ulma2000,
looking for a little bit on google https://www.ulmapellet.fr/pi%C3%A8ces-d ... h%C3%A9es/
we find the spare parts including the electronic management of Ulma is a Zelio hidden behind in the hull of "decoration" of the burner is incidentally what dede used and I too will do the same I find quite simple programming the zelio with the zelio soft

I try to advance this weekend, for mine I tried to manufacture a Palazetti style lock, for lack of material, I left on the construction of a horizontal worm in a square tube, yes I well said square lol ...
I need to order gearmotors ......
I explain that in photo it will be easier


because the outbreak of fuel oil that motivates me even more

Re: Self-construction burner pellet REPLICA

published: 07/01/18, 17:48
View olives55
Bonscoir I wish you a lot of success and I love your motivation and determination to build.Me about I wait for the end of the month for the return of a few sous to end to buy the tubes the fan ... ect Good luck

Re: Self-construction burner pellet REPLICA

published: 07/01/18, 18:49
View BP86
So little picture of the Version 2.xx version I disregard all the mods I tried for the escalation
1.jpg
1.jpg (116.45 KB) Viewed times 22848

2.jpg
2.jpg (113.79 KB) Viewed times 22848


Here a prototype for tests encouraging the principle of a Palazzetti style lock
3.jpg
3.jpg (105.05 KB) Viewed times 22848


3.0 Version:
As I said in a previous post not having the hardware so I turned to a worm system
4.jpg
4.jpg (94.86 KB) Viewed times 22848

on the same principle as in my test silo
4b.jpg
4b.jpg (92.94 KIO) Accessed 22848 times

in principle it gives that:
5.jpg
5.jpg (103.17 KB) Viewed times 22848

6.jpg
6.jpg (114.89 KB) Viewed times 22848

Re: Self-construction burner pellet REPLICA

published: 10/01/18, 19:03
View olives55
Good evening bravo for the advances. Could you give the quotations of the two tubes of the same box to which is fixed the fan-souffleur.Thank you