Reset Palazzetti Pellet Stove: Service Code to Clear 2000h Maintenance
published: 14/11/17, 14:58
I am looking to install a stove Pellets ... I look at the market of the opportunity and I went around several brands. And I found the following ... (this may exist at other manufacturers)
Palazzetti pellet stoves are provided with a compulsory maintenance cycle every 2000h, this maintenance must be done by an "approved" installer, obviously, it is invoiced, which keeps the customer captive (it's not cool commercially for users ...).
Attention I do not say that we should not do this maintenance: but it is probably possible to do it yourself, clean a stove and a fireplace is not the sea to drink either. In addition 2000h is little in the heat ... it involves several annual maintenance in many cases!
Obviously the stove beeps when the maintenance is not done which makes its use almost impossible ...the reset of these 2000h is protected by a code that is not given in the manual ...
So I searched a little on the net to try to find this code and I found this:
To obtain the SAV code, you must add the stove's power to the 4 digits of the code that appears on the screen when you want to enter the service menu.
And then follow this procedure to reset the maintenance counter:
Source: et http://palazzetti-lola.blogspot.be/2013 ... bible.html
This forced maintenance procedure was cooling me down to choose a Palazzetti stove that look pretty good for the rest ... And installers rarely mention it ... some do not even know what I read about other forums...
It remains to be seen if it works (or still works because it dates from 2013 ...)? Maybe Palazzetti has even reviewed this because commercially it's a little crippling ...
Anyway could anyone test on his Palazzetti stove and give us the result?
Palazzetti pellet stoves are provided with a compulsory maintenance cycle every 2000h, this maintenance must be done by an "approved" installer, obviously, it is invoiced, which keeps the customer captive (it's not cool commercially for users ...).
Attention I do not say that we should not do this maintenance: but it is probably possible to do it yourself, clean a stove and a fireplace is not the sea to drink either. In addition 2000h is little in the heat ... it involves several annual maintenance in many cases!
Obviously the stove beeps when the maintenance is not done which makes its use almost impossible ...the reset of these 2000h is protected by a code that is not given in the manual ...
So I searched a little on the net to try to find this code and I found this:
To obtain the SAV code, you must add the stove's power to the 4 digits of the code that appears on the screen when you want to enter the service menu.
And then follow this procedure to reset the maintenance counter:
Source: et http://palazzetti-lola.blogspot.be/2013 ... bible.html
This forced maintenance procedure was cooling me down to choose a Palazzetti stove that look pretty good for the rest ... And installers rarely mention it ... some do not even know what I read about other forums...
It remains to be seen if it works (or still works because it dates from 2013 ...)? Maybe Palazzetti has even reviewed this because commercially it's a little crippling ...
Anyway could anyone test on his Palazzetti stove and give us the result?