FERROLI kit sun7

[Ramiro60]

Hello
I need information about the A01 anomaly

I have augemente breakdowns on phases 2 / 3 et4
it is a little better but not great
Kate!

please

[DETRY]

hello ramiro60
have a look at the subject "question about the 32kw ​​ferroli drûleur kit"

[Ramiro60]

Good evening
+ Excuse me
but that is what the subject burner FERROLI
meric

[Ramiro60]

Good evening

excuse me but I do not know what is the subject kit bruleurs ferroli +

thanks for the information

[DETRY]

hello ramiro60


search for "pellet burner"

click on the first item "modified fuel oil boiler: ferroli kit forum comfort ... "and you already have a lot of very relevant pages.
I don't know if that can help you?

Confront the clarity and accessibility of the programmer's command; for the moment I operate in manual mode power 1, controlled by a room thermostat, independent circulator of the burner and controlled by a thermal switch 30 ° C and everything works perfectly; I prefer to wait and solve 1 problem at a time .... So I could see that the A01 messages came following the pellet feed break ..; It is necessary until above the light of the screw tube. Do not move the tube unnecessarily the pellets can settle down on the screw and cause the break. I also put the tube in a slightly less vertical so that the light presents a wider opening. You can also find me on pellet burner See you soon, Glad to share our experience.
Good reading