Fresh news from Padawan

Innovations, ideas or patents for sustainable development. Decrease in energy consumption, reduction of pollution, improvement of yields or processes ... Myths or reality about inventions of the past or the future: the inventions of Tesla, Newman, Perendev, Galey, Bearden, cold fusion ...
Padawan
Éconologue good!
Éconologue good!
posts: 260
Registration: 05/01/06, 13:27
x 6

Fresh news from Padawan




by Padawan » 04/02/09, 16:59

Hello every body
it’s not perpetual motion yet but i’m patenting two magnet systems
I present to you "Flash Magnet ball"
Yours and especially Quartz
http://www.youtube.com/watch?v=IIp9XwtTpPc
Image
0 x
Back to the future
User avatar
elephant
Econologue expert
Econologue expert
posts: 6646
Registration: 28/07/06, 21:25
Location: Charleroi, center of the world ....
x 7




by elephant » 04/02/09, 17:15

Yep! :D
and, if on the left side you gradually spread the magnets so that gravity takes its rights? (you have to guide the ball through a plastic tunnel, of course).
0 x
elephant Supreme Honorary éconologue PCQ ..... I'm too cautious, not rich enough and too lazy to really save the CO2! http://www.caroloo.be
Christophe
Moderator
Moderator
posts: 79117
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10972




by Christophe » 04/02/09, 18:23

Another great video of our Jedi student !!

It reminds me of the SMOT tested by Naudin at the time!

Padawan can you send me a little email please? I have something "important" to tell you.

ps: I share this comment on the video

Sadly you are going the "patent way", which leads to nothing.
0 x
User avatar
gegyx
Econologue expert
Econologue expert
posts: 6930
Registration: 21/01/05, 11:59
x 2870




by gegyx » 04/02/09, 19:20

Do not get carried away!
: Lol:

As in all these magnetic ramp systems, the ball remains trapped in the system.


For a ramp with aligned magnets oriented similarly (and at equal distance), with a magnet ball which rolls in the middle (and at the same distance).

If you place the ball anywhere on the ramp, it will not go very far, and will remain stuck to the ramp.

Now, if you let go of it before the start of the ramp, it will be strongly attracted by the aligned magnets.
A good acceleration, and with the kinetic energy, because it rolls while adhering to the ramp, it will go to the end of the ramp, but risks going back, until the middle of the ramp assembly which is considered to be a global magnet.

This is why in the video, there are additional magnets at the end of the course, so that the ball remains on the end of the ramp and does not return to the middle ...

From there, to make it continue and leave its system, it is the whole quest of this search for the Graun surunitaire.

8)
0 x
Christophe
Moderator
Moderator
posts: 79117
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10972




by Christophe » 04/02/09, 19:29

I do not get carried away, you know my opinion on the surunitaire.

It is still very nice as a video (like many others from padawan: http://www.youtube.com/user/gilbondfac )
0 x
User avatar
Remundo
Moderator
Moderator
posts: 15992
Registration: 15/10/07, 16:05
Location: Clermont Ferrand
x 5188




by Remundo » 04/02/09, 20:36

Padawan is a specialist in electromagnetism experiments, indeed.

Very successful 8)
0 x
Image
Padawan
Éconologue good!
Éconologue good!
posts: 260
Registration: 05/01/06, 13:27
x 6

it's a future patent




by Padawan » 04/02/09, 20:47

I prepare a helical ramp
and the ball does not stay in the rail it accelerates constantly! (GREGIX)
that's the secret to success read the reviews and try
to reproduce the small "accelerator" in "hard disk" you will understand. Okay !! it is not a world first but it is a technological innovation told me "INPI" (patent filing) I must protect it.
Thank you for your encouragement
0 x
Back to the future
User avatar
gegyx
Econologue expert
Econologue expert
posts: 6930
Registration: 21/01/05, 11:59
x 2870




by gegyx » 04/02/09, 22:05

the ball does not stay in the rail it accelerates constantly! (GREGIX)
this is the secret of success read the comments

I am happy to learn that your new prototype is called GREGIX.
:D
I had not read the comments in English in the video: "There is a constant increase in the magnetic field from the start to the end of the ramp".
So effectively, the ball (neo) goes to the end of the ramp in the progressive field.

In all progressive ramp systems the mobile which accelerates, when it exceeds the last magnet returns, caught up by the magnetic system from which it leaves.

In the example of the "magnetic cannon", at the end of the race the magnetic ball transmits its energy, by elastic shock to a glass ball which only leaves the system (because not influenced by magnetism).

There, the mobilel would not do it, and would still leave the system?
Presumably due to the kinetic energy developed by the rotation of the mobile.
But then why, these additional magnets at the end of the journey?
It is said that it is to stop the ball… Ah good? And why not let it continue, then?
That would be sufficient proof for a perpetual closure, right?
Would not these magnets placed at the end of the stroke, called "blocking" also help a little acceleration before the end of the ramp?
It is a legitimate question.

With the example of the 2 complete coupled hard disks:
If the accelerator magnets are placed on ¾ of the circumference. There is a departure, and an arrival, then a quarter of a circumference without a magnetic field (apart from the proximity of the end and beginning of the magnetic ramp).
If the ball comes out of its ramp easily as you seem to say, why put blocking magnets at the end of the ramp ???

It was precisely the easy opportunity to prove the closure once and for all (with an external plastic guide to bring the ball back using gravity, towards the start of the ramp).

I do not discredit your great educational and popularization merit and your talent for experimenting.
I make an observer comment, simply critical on the goal of the realization.
(But if you are in the process of protection of invention, I could keep my gluttony of dream.)

I found the departure of the ball in the system interesting, triggering caused by the influence of the approach of the ball of the “magnetic cannon”, placed just behind.
Existence of a magnetic wave or wind? :D

Friendly.
0 x
User avatar
Remundo
Moderator
Moderator
posts: 15992
Registration: 15/10/07, 16:05
Location: Clermont Ferrand
x 5188




by Remundo » 04/02/09, 22:39

Hello,

The Padawan system does not produce energy.

Near the magnets, the ball begins to magnetize (ferromagnetic),

then behaves like a magnetic dipole. It undergoes a force in (M.grad)(B), translated into French, it still tends to head towards areas of strong magnetic fields.

When the ball goes up, it takes gravity energy which corresponds at the start to the energy that the hand impelled to it by placing it by force in a magnetic zone mechanically unstable for it.

By neglecting friction, we are faced with a conservation of the sum of energies (kinetics + gravity + magnetic).

@+
0 x
Image
Padawan
Éconologue good!
Éconologue good!
posts: 260
Registration: 05/01/06, 13:27
x 6

cerebration




by Padawan » 05/02/09, 09:55

Well done everyone! you cogitate well!
but there is still a law of physics which forbids me many things (conservation of energy)
But I just present a ramp system
"a magnetic accelerator" which requires nothing or very little at the start because even the influence of another magnetic field
(cannon ball) can trigger the phenomenon.
my goal is to demonstrate that we can make combinations
magnets to get what you get in a DC machine to vary the intensity of the field, there is also the possibility of creating fairly special magnets, I did the simulations because my ramp is a complex combination that I had to follow with a hall effect probe because even a simulation did not give me satisfaction ...... But BECAREFUL ALL I never spoke of perpetual movement .... for now! I will tell you about it when the time comes on another manipulation always with magnets ....
0 x
Back to the future

 


  • Similar topics
    Replies
    views
    Last message

Go back to "Innovations, inventions, patents and ideas for sustainable development"

Who is online ?

Users browsing this forum : No registered users and 107 guests