Hi everybody,
by doing a search in my doc, I realized that I had lost some info or so I forgot to record during my surfing ... In short, I no longer find my info on the magnegas, I am some of you have documentation on that.
good for reminder, I find its sites there:
http://www.magnegas.com
http://www.rexresearch.com/santilli/santilli.htm
So if you have other info (in French would be the best), I am interested because it looks very close to the plasma project that I am carrying out.
please
yahi
MagneGas
- plasmanu
- Econologue expert
- posts: 2847
- Registration: 21/11/04, 06:05
- Location: The 07170 Lavilledieu viaduct
- x 180
Apparatus and method for producing a clean burning fuel gas with long life electrodes and multiple plasma-arc-flows
http://www.freepatentsonline.com/6926872.html?highlight=santilli,santilli.0
which follows on from this:
Apparatus and method for recycling contaminated liquids
http://www.freepatentsonline.com/6540966.html
sorry it's english
manu
http://www.freepatentsonline.com/6926872.html?highlight=santilli,santilli.0
which follows on from this:
Apparatus and method for recycling contaminated liquids
http://www.freepatentsonline.com/6540966.html
sorry it's english
manu
0 x
"Not to see Evil, not to hear Evil, not to speak Evil" 3 little monkeys Mizaru
hi manu !!
Ok it's not bad, but bcp provides less than what I had.
well it is not very serious, it is a process little known in France.
No new projects?
you went to see: https://www.econologie.com/forums/plasma-ou-pas-t671.html
at the bottom of the page I put links from where I am. It is progressing slowly. I have another video if you are interested.
@ soon
yahi
Ok it's not bad, but bcp provides less than what I had.
well it is not very serious, it is a process little known in France.
No new projects?
you went to see: https://www.econologie.com/forums/plasma-ou-pas-t671.html
at the bottom of the page I put links from where I am. It is progressing slowly. I have another video if you are interested.
@ soon
yahi
0 x
ouille, aille, ouillaille: cheesy:
yes then the 50kw is not yet for me !! in addition it is his machine that he shows at the first image of the page magnegas.com! It's a monster ! My machine is in my hand, it's a chip next to the santilli beast! I will be much more reasonable with a 2 or 3 kw device! It should be enough for a start!
you can follow this forum : http://www.abcelectronique.com/forum/sh ... php?t=6315
to see where I am in the construction of a plasma cutting station. A second use will be to make it a fuel gas generator by adding elements to the water, but I'm not quite there yet.
I still have to restart the whole station in the test phase, then with the torch, and test an assembly to make the water / gas separation, and finally optimize the gas production.
I gather the information from cutting torches, bingofuel, CFR and magnegas to try to make it usable.
@+
yahi
you can follow this forum : http://www.abcelectronique.com/forum/sh ... php?t=6315
to see where I am in the construction of a plasma cutting station. A second use will be to make it a fuel gas generator by adding elements to the water, but I'm not quite there yet.
I still have to restart the whole station in the test phase, then with the torch, and test an assembly to make the water / gas separation, and finally optimize the gas production.
I gather the information from cutting torches, bingofuel, CFR and magnegas to try to make it usable.
@+
yahi
0 x
- plasmanu
- Econologue expert
- posts: 2847
- Registration: 21/11/04, 06:05
- Location: The 07170 Lavilledieu viaduct
- x 180
Re: ouille, aille, ouillaille: cheesy:
yahi wrote:to separate water / gas, and finally optimize gas production.
The top is the still, it's con bubbles: it goes up
pi the compressor, the bottles, the factory ...
The bicarbonate is super conductive, and you spend 2 or 3kwh. Do not put your fingers there.
How do you see the torch?
manu
0 x
"Not to see Evil, not to hear Evil, not to speak Evil" 3 little monkeys Mizaru
for the moment I took photos only for a montage as indicated:
http://yahi.free.fr/photo/Latorchemanuelle/index.html
otherwise I have other elements and I have several possible choices:
either use automatic gas purges (radiator type, etc.), or use flushing systems.
I will give the diagrams another time, I would have to scan all of this!
if not nlc, it is possible that we meet I thought about it too, but I am trying for the moment to advance on the post, so that it is a little more functional! But in the future it will be possible!
for potassium carbonate, I ordered at the pharmacy near my home, I also collect wood ashes, rainwater, nettle manure and I hope more to try out liquids to be transformed by plasma.
but as I said, I am not yet in these tests! See how long it has taken so far to get there (Sep to Feb)!
But it's on I'm closer to the end than the beginning!
for the compressor and all that ... I know in. if it's terrible! Should not be tempting the devil with a small bomb, in any case, it's not an idea that connects me right away! I prefer the option of immediate use, see generator!
@ soon
yahi
http://yahi.free.fr/photo/Latorchemanuelle/index.html
otherwise I have other elements and I have several possible choices:
either use automatic gas purges (radiator type, etc.), or use flushing systems.
I will give the diagrams another time, I would have to scan all of this!
if not nlc, it is possible that we meet I thought about it too, but I am trying for the moment to advance on the post, so that it is a little more functional! But in the future it will be possible!
for potassium carbonate, I ordered at the pharmacy near my home, I also collect wood ashes, rainwater, nettle manure and I hope more to try out liquids to be transformed by plasma.
but as I said, I am not yet in these tests! See how long it has taken so far to get there (Sep to Feb)!
But it's on I'm closer to the end than the beginning!
for the compressor and all that ... I know in. if it's terrible! Should not be tempting the devil with a small bomb, in any case, it's not an idea that connects me right away! I prefer the option of immediate use, see generator!
@ soon
yahi
0 x
We don't care that the project is not finished!
It doesn't prevent us from discussing what we do ))
The fact of exchanging can give us ideas and new ways of exploration. And in addition, I am an electronician;)
Especially since you want to make a plasma system to cut from what I understand.
But you know that with the electrolysis of water, project on which "I am working" at the moment, we can do the same thing?
A+
It doesn't prevent us from discussing what we do ))
The fact of exchanging can give us ideas and new ways of exploration. And in addition, I am an electronician;)
Especially since you want to make a plasma system to cut from what I understand.
But you know that with the electrolysis of water, project on which "I am working" at the moment, we can do the same thing?
A+
0 x
Go back to "Innovations, inventions, patents and ideas for sustainable development"
Who is online ?
Users browsing this forum : Majestic-12 [Bot] and 164 guests