Result of this topic in video: https://www.econologie.com/forums/pollution- ... t5463.html
I repeat here what I wrote about fluorescent bulbs: https://www.econologie.com/forums/post75639.html#75639
I just received a copy of this device: https://www.econologie.com/shop/detecteu ... p-143.html
I hastened to test some 2 bulbs: a 9W "unbranded" and the 30W that we offer on the store: https://www.econologie.com/shop/megaman- ... -p-73.html
Well as I thought the information of fluos who are dangerous at the wave level is more than theMENTAL INTOXICATION (Lobbyist) than scientific information.
Alors yes neon bulbs create an electromagnetic field but here are my 1ere findings after having toyed 5 minutes that are really blatant and gruesome for the perpetrators of these intox :
a) This is the base of the bulb that emits: there is nothing at the level of the tubes contrary to what can be read here and there (and what I would have myself thought).
b) the field is reduced rapidly: from 10cm to 20cm there is nothing! And I repeat ONLY at the level of the CULOT, NOTHING at the TUBES !! I would make accurate measurements as soon as possible.
c) the field is more important when the bulb is hot but at the level of the tubes does not change (curiously?): it remains at zero.
d) and last but not least a mobile phone in standby EMET more than an EM measurement of TUBES (of course since 0) and I'm not talking about a phone running ....
I will try to make a video this afternoon for denounce these false and slanderous scientific accusations probably launched to better hide the problem it real real GSM (I rarely head within 10 cm of a bulb, for against the GSM ...). The problem is that a lot of people relayed the info without any verification ... grâve ...
I doubt that this upgrade goes around the net and writing merdiatic as did the poison ...
If you have any ideas for things to measure for the "movie"?
I planned to do the following things:
a) drawing of the EM "spectrum" of a fluorescent bulb
b) GSM measurement in operation and standby
c) measurement on a neon
d) microwave measurement
If you have any ideas?
Basic measurements of electromagnetic fields
-
- Moderator
- posts: 79126
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 10974
Basic measurements of electromagnetic fields
Last edited by Christophe the 06 / 06 / 08, 11: 02, 2 edited once.
0 x
Do a image search or an text search - Netiquette of forum
-
- Moderator
- posts: 79126
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 10974
Well, my PC is also a nice source of pollution EM!
For the back I understand, there is the main transformer ... But the front?
Especially the front and back ... cons the LCD screen remains at 0
For the back I understand, there is the main transformer ... But the front?
Especially the front and back ... cons the LCD screen remains at 0
0 x
Do a image search or an text search - Netiquette of forum
-
- Moderator
- posts: 79126
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 10974
Yes for CRT it's worse than LCD
For the PC ca goes up in the red (largely) at the level of the power supply (but not + of 5 cm).
Well the best is to make me a list of things to test and I will make you a series of small videos ... well for the "things" that I have available of course.
Another suspicious thing: a "long" neon (36W) remains at 0.0 (logical like the fluorescent) on the other hand a short neon is in the red within a radius of 30cm over its entire length !!
I also measured neodymium magnets: 4 connected in series make less "field" than an active GSM !! To get an idea of their power, these 4 magnets manage to "lift" a hammer without problem!
You will see all this on the video
For the PC ca goes up in the red (largely) at the level of the power supply (but not + of 5 cm).
Well the best is to make me a list of things to test and I will make you a series of small videos ... well for the "things" that I have available of course.
Another suspicious thing: a "long" neon (36W) remains at 0.0 (logical like the fluorescent) on the other hand a short neon is in the red within a radius of 30cm over its entire length !!
I also measured neodymium magnets: 4 connected in series make less "field" than an active GSM !! To get an idea of their power, these 4 magnets manage to "lift" a hammer without problem!
You will see all this on the video
0 x
Do a image search or an text search - Netiquette of forum
Neodymium?
I thought that the problem of harmfulness, came mainly from the frequency of the field ...
(which tuned with a body organ)
So your meter, also signals the constant magnetic field of a magnet.
Did you try measuring on an extension cord as I specified above?
We read everywhere, on the harmfulness of the domestic electric field, simply because of the proximity of the passage of sheaths 230v AC.
I thought that the problem of harmfulness, came mainly from the frequency of the field ...
(which tuned with a body organ)
So your meter, also signals the constant magnetic field of a magnet.
Did you try measuring on an extension cord as I specified above?
We read everywhere, on the harmfulness of the domestic electric field, simply because of the proximity of the passage of sheaths 230v AC.
0 x
-
- Moderator
- posts: 79126
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 10974
gegyx wrote:So your meter, also signals the constant magnetic field of a magnet.
Ben read the description you will understand better: https://www.econologie.com/shop/detecteu ... p-143.html
Here are the instructions: https://www.econologie.info/share/partag ... oOgSkT.pdf
As for the magnets, you have to shake them "a bit" so that it is detected: without movement = 0 ... with a GSM it's almost the same: when it does not move in standby the thing detects nothing ... but you just have to shake it for it to panic in the red ...
gegyx wrote:Did you try measuring on an extension cord as I specified above?
We read everywhere, on the harmfulness of the domestic electric field, simply because of the proximity of the passage of sheaths 230v AC.
Not yet it will be done in 30 seconds
0 x
Do a image search or an text search - Netiquette of forum
-
- Moderator
- posts: 79126
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 10974
For the AC lead is in the red on a radius of 2 cm approximately (load = my desktop is 120 to 130W).
Orange from 2 to 4 cm
And green after ...
No need to shake the AC device whistles by itself
Orange from 2 to 4 cm
And green after ...
No need to shake the AC device whistles by itself
0 x
Do a image search or an text search - Netiquette of forum
-
- I understand econologic
- posts: 81
- Registration: 18/02/08, 22:48
-
- Similar topics
- Replies
- views
- Last message
-
- 11 Replies
- 5971 views
-
Last message by hitman32
View the latest post
16/11/09, 20:37A subject posted in the forum : Electricity, electronics and IT Hi-Tech, Internet, DIY, lighting, materials and new
-
- 14 Replies
- 7662 views
-
Last message by pieroxy
View the latest post
18/10/09, 10:31A subject posted in the forum : Electricity, electronics and IT Hi-Tech, Internet, DIY, lighting, materials and new
-
- 20 Replies
- 12345 views
-
Last message by louisonb
View the latest post
06/07/09, 21:54A subject posted in the forum : Electricity, electronics and IT Hi-Tech, Internet, DIY, lighting, materials and new
Who is online ?
Users browsing this forum : No registered users and 147 guests