Set time a 850 Ecowatt !!!

Hi-tech electronic and computer equipment and Internet. Better use of electricity, help with the work and specifications, equipment selection. Presentations fixtures and plans. Waves and electromagnetic pollution.
bricoeol
I discovered econologic
I discovered econologic
posts: 5
Registration: 15/10/12, 12:13

Set time a 850 Ecowatt !!!




by bricoeol » 10/09/13, 12:29

Hello everyone,
I just got an ecowatt 850, to measure the production of a wind turbine.
I meet with concern when importing data.
Start of Transfer then a message:

the time in e2 is so much much different, please correct the date and time in e2 and try again

And I do not know how to change the time and date in E2. I do not even know what E2 is.
I can find no explanation in the manual provided of course.
If anyone can help me, he is welcome.
Thank you in advance
0 x
Christophe
Moderator
Moderator
posts: 79117
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10972




by Christophe » 11/09/13, 08:33

e2?

What is the time / date of your pc?
What is the time / date of your ecowatt?

If your pc is old and has a stack problem, it may lose the date setting (but if connected to the internet there windows or linux the rule automatically)
0 x
bricoeol
I discovered econologic
I discovered econologic
posts: 5
Registration: 15/10/12, 12:13




by bricoeol » 11/09/13, 10:48

Thank you,,
No, my pc is on time, and up to date.
It's my ecowatt that is not.
My request is about how to bring the ecowatt up to date and time.
Actually, I think it's at 4 / 01 / 2009 and 22h36 ...
On the manual provided, nothing for that.
0 x
Christophe
Moderator
Moderator
posts: 79117
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10972




by Christophe » 11/09/13, 10:51

From memory (I use one from 2009) I had no particular difficulty to adjust mine ... I'll see and give you the method ...
0 x
bricoeol
I discovered econologic
I discovered econologic
posts: 5
Registration: 15/10/12, 12:13




by bricoeol » 11/09/13, 11:02

ok, it's cool of you
Thank you
0 x
Christophe
Moderator
Moderator
posts: 79117
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10972




by Christophe » 11/09/13, 11:35

That's the method, it's very easy:

There is a small button behind the "Set Time / Alarm" display, press it for 2 to 3 seconds and the hour will flash and you will be able to set the time and date with the arrows and the mode button to confirm ...
0 x
bricoeol
I discovered econologic
I discovered econologic
posts: 5
Registration: 15/10/12, 12:13




by bricoeol » 11/09/13, 13:53

Thank you very much,
Indeed when we know, it's simple! And in addition it works well.
So, updated and on time, and collected data, to see the production of my small wind turbine;
Result: 7.8 Kwh in 3 days.
It is not normal that the manufacturer of this product does not provide a detailed record.
For his discharge, I'm a little silly too, because for a lot of devices, it's a little the same procedure.
Yes, but my old age no longer allow me to have this presence of mind!

Thank you again Christophe : Lol:
0 x
User avatar
Forhorse
Econologue expert
Econologue expert
posts: 2485
Registration: 27/10/09, 08:19
Location: Perche Ornais
x 359




by Forhorse » 11/09/13, 20:04

When I bought mine there was a user manual provided in many languages ​​to configure all the functions of the device (date and time, energy tariff, etc ...)
I believe it is also in electronic form on the software CD.
0 x
Christophe
Moderator
Moderator
posts: 79117
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10972




by Christophe » 11/09/13, 20:20

bricoeol wrote:It is not normal that the manufacturer of this product does not provide a detailed record


I confirm Forhorse, the manual explains how to set the time ...
0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "Electricity, electronics and computers: Hi-tech, Internet, DIY, lighting, materials, and new"

Who is online ?

Users browsing this forum : Google Adsense [Bot] and 195 guests