Data logging system

[ojal]

Hello,

I want to equip myself with a data recording system to carry out different experiments.
The first ones that I want to realize are temperature measurements in solar assemblies.
I would like a system that runs on a PC and can record multiple channels simultaneously.

For my first assembly I will need temperature probes. Where can I find my happiness?

Thank you in advance for your advice ;-)

[kumkat]

like that?

https://www.econologie.com/shop/enregist ... p-192.html

[ojal]

Goods.

I had already seen this nice product.
In my research, I am looking for an acquisition system on several simultaneous channels. I imagine a software on PC with a USB box on which we come to connect the various sensors ...?

[renaud67]

Hello,
If you are not looking at all done (turnkey ready to work) and you are a bit of a handyman, you have to look at the arduino side (look for example garduino which is a small achievement that manages a micro greenhouse ).
the difficulty, you have to understand a little,
the advantage, we make our product to measure.
@+

[Gaston]

There are digital multimeters with USB connection that can be used as a basis.

To measure something other than Volts or Amperes, just equip them with the right probes.

The downside is that you have to use one multimeter per measurement channel ...

[Christophe]

like that?

https://www.econologie.com/shop/enregist ... p-192.html

Thank you for the "ad", you can also use this one, if you have T ° probes which respond in voltage, then you have to convert the scales:
https://www.econologie.com/shop/enregist ... p-115.html

(4 ways but is not autonomous like the other, therefore requires a pc next to it)

[ojal]

Hello,
If you are not looking at all done (turnkey ready to work) and you are a bit of a handyman, you have to look at the arduino side (look for example garduino which is a small achievement that manages a micro greenhouse ).
the difficulty, you have to understand a little,
the advantage, we make our product to measure.
@+

The ARDUINO system is a system that I did not know but that tempts me a lot ... I just need to understand if it is 'simple' to save data on SD card, memory other or by other method ...

Thank you ;-)