pantone mounting Truck Renault B70

[phil 14]

Finally some work to present to you after a study of 8 month of the councils of all the experts of this forum that I want to thank.
I mount a water doping on a renault B 70 truck (13 consumption l / 100 in top speed 85 km / h) with stainless steel bubbler (recovery) heated with a heating radiator. AX powered by the coolant and a reactor in exhaust pipe just exit pipe.
What do you think the experts ????
I will try to put a photo with the components.
see you soon
phil 14

[lau]

Economy realized
Reactor outlet temperature
reactor / venturi distance
quality of bubbling
diameter hose and core
origin of water and its conso / 100km
sound level
attitude of the compass on the reactor

All! we want to know everything!

[phil 14]

Good evening Lau
If I had managed to put the picture of the accessories on the city, you would have seen that I am not yet at the tests.
Can you tell me the procedure to follow, I am stopped after the manipulation host it of the program www.imageshack.us given by econology.
please
phil 14

[lau]

you go there: http://www.image-dream.com/
click browse / you are looking for your photo in JPEG format (required) and you have open / click to host / copied pasted thumbnail on forum

[gegyx]

Public chat http://www.image-dream.com/
Images hosted anonymously are stored 60 days. For unlimited time hosting your photos and images do not hesitate to register in 2 small minutes, you will enjoy many benefits reserved for members!

[phil 14]

Thank you Lau

[phil 14]

Oops! I can not control ifranview
second try

[phil 14]

soon, I'll be back tomorrow for more details.

stainless steel reactor rod: diam. : 16 L = 100mm centered with 3 weld points to 1 tip and 3 centering screw in the tube that immobilizes it at the other end.
stainless steel reactor tube: int. : 16 mm
outside diameter: 21 mm
length: 210 mm

a + phil 14

[phil 14]

Bonjour à tous

POST PREVIOUS ERROR:
tube measurement: 18 mm inside and 21 mm outside

On the attached photo of the exhaust pipe (initial 45 mm inside diameter), I increased the outlet pipe diameter to bring it back to the original diameter at the reactor head in order to concentrate the heat to this place as designed by André. This because of the restriction a little too important (+ 30%) that gives my tube of reactor + the bend in the pipe of escape.
phil 14

[phil 14]

good evening everyone
Question to the experts:
I await your criticism on the future design of my bubbler.
Enlarge the picture that follows.
please
phil 14