Hi everybody
I want to equip my transporter (1600 ct engine) with a pantone reactor
I already have a lot of info but I'm missing one of the most crucial!
How to calculate the reactor dimensions while knowing that the spaces between the tubes and the rod must not exceed 2 mm
So how do you know the length and the required daimeter?
Merci de votre réponse
Eric
install a Pantone on a vw transport
- krissg29
- I understand econologic
- posts: 80
- Registration: 07/11/04, 21:26
- Location: Finistere center
- x 2
Hi Eric
go see Adrien's subjects
he doped with water on a wetsuit
it's almost the same engine as the 1600 CT
https://www.econologie.com/forums/moteur-pan ... vt755.html
go see Adrien's subjects
he doped with water on a wetsuit
it's almost the same engine as the 1600 CT
https://www.econologie.com/forums/moteur-pan ... vt755.html
0 x
It should not be confused and ingenious engineer
Hello Kriss
Did you take a sabbatical year? or other, you are caught in other concerns of life (I speak for the injection on your WV)
it is difficult to find the time to do everything, we have to live through our DIY.
In my case it is the tests that I find long it eats a large part of my time ...
Andre
Did you take a sabbatical year? or other, you are caught in other concerns of life (I speak for the injection on your WV)
it is difficult to find the time to do everything, we have to live through our DIY.
In my case it is the tests that I find long it eats a large part of my time ...
Andre
0 x
- Asgard bone tyr
- My R21 Pantone on TF1 :)
- posts: 160
- Registration: 06/02/05, 18:21
- Location: all over
- x 1
Hello Asgard,
The problem in the climate that I live the tests will only be validated in the month of May, currently I am basing myself against the temperature and the insulation of the rooms in summer it gets too hot, in winter I only make short trips.
To do tests it takes a system that works all the time
often times in fact changes and the cause is elsewhere,
I fully agree that we must talk to each other, and I believe that I do my share, often there are unhappy experiences to which I do not speak about it would only confuse the forum , only when a guy talks about a project we can intervene to tell him that we have not succeeded in this or that montage.
When I give consumption figures it is always done on a journey of more than 200km and in summer, because in winter even by heating the air and everything I do not arrive at the figures for summer ...
Andre
The problem in the climate that I live the tests will only be validated in the month of May, currently I am basing myself against the temperature and the insulation of the rooms in summer it gets too hot, in winter I only make short trips.
To do tests it takes a system that works all the time
often times in fact changes and the cause is elsewhere,
I fully agree that we must talk to each other, and I believe that I do my share, often there are unhappy experiences to which I do not speak about it would only confuse the forum , only when a guy talks about a project we can intervene to tell him that we have not succeeded in this or that montage.
When I give consumption figures it is always done on a journey of more than 200km and in summer, because in winter even by heating the air and everything I do not arrive at the figures for summer ...
Andre
0 x
- krissg29
- I understand econologic
- posts: 80
- Registration: 07/11/04, 21:26
- Location: Finistere center
- x 2
hi Andrew
It is true that I did not do much on the cox or on the pantone this year (2005), except to follow the forum and some small non-pmc experiences.
You still have to take care of the family and the house from time to time
I will try to improve in 2006 (a little less theory and a little more practice).
And for the tests with Asgard and the others, maybe with the Econology association it will be easier to organize?
It is true that I did not do much on the cox or on the pantone this year (2005), except to follow the forum and some small non-pmc experiences.
You still have to take care of the family and the house from time to time
I will try to improve in 2006 (a little less theory and a little more practice).
And for the tests with Asgard and the others, maybe with the Econology association it will be easier to organize?
0 x
It should not be confused and ingenious engineer
-
- Similar topics
- Replies
- views
- Last message
-
- 31 Replies
- 38192 views
-
Last message by brahimour
View the latest post
31/01/14, 01:01A subject posted in the forum : Water injection in engines: montages and experiments
-
- 1 Replies
- 5724 views
-
Last message by Christophe
View the latest post
14/08/07, 16:54A subject posted in the forum : Water injection in engines: montages and experiments
Back to "Water injection in the engines: the assembly and experimentation"
Who is online ?
Users browsing this forum : No registered users and 133 guests