Building your own kit to run on ethanol E85

crude vegetable oil, diester, bio-ethanol or other biofuels, or fuel of vegetable origin ...
User avatar
nlc
Econologue expert
Econologue expert
posts: 2751
Registration: 10/11/05, 14:39
Location: Nantes

Building your own kit to run on ethanol E85




by nlc » 07/10/08, 08:57

That's it I create a new topic as a result of that onebecause here I will not talk about the existing kits in the trade, but indeed the construction of a kit for a few euros.

I discovered on Saturday that I could run on ethanol with my petrol car (a 2.0l 98l multi-point injection laguna from XNUMX), so I looked at it! The kits are expensive, it's theft compared to the actual function of the kit!

Here are some detailed explanations on the operation of kits in general, which I use with my own kit.

And here are the details of the construction of the kit

All I hope is that this topic will demystify the operation of these kits to prevent you getting fooled if you want to ride with 100% ethanol E85!
0 x
User avatar
nlc
Econologue expert
Econologue expert
posts: 2751
Registration: 10/11/05, 14:39
Location: Nantes




by nlc » 07/10/08, 12:52

Well here I have just ordered all components at Farnell.

I have for 19.99 € HT. Just missing the circuit board and a possible box.
0 x
User avatar
nlc
Econologue expert
Econologue expert
posts: 2751
Registration: 10/11/05, 14:39
Location: Nantes




by nlc » 07/10/08, 13:51

I added a box to 4 € 98 and a plate this circuit board 300x200 to 12 € 03, I went to 37 € HT all round, 45 € 25.
0 x
tome
I understand econologic
I understand econologic
posts: 56
Registration: 14/09/05, 23:47
Location: oise




by tome » 07/10/08, 14:35

:D It's great your kit!
You really think about everything!
0 x
User avatar
nlc
Econologue expert
Econologue expert
posts: 2751
Registration: 10/11/05, 14:39
Location: Nantes




by nlc » 08/10/08, 16:28

Good UPS passed, I received all the components!
0 x
User avatar
manoria68
Éconologue good!
Éconologue good!
posts: 301
Registration: 07/10/08, 12:34
Location: ATLANTIS
x 2




by manoria68 » 09/10/08, 13:39

Hello,
I also made a home kit, but a little simpler.
I took the signal elec injection via optocouplers, and amplified by transistor, and I simply power an 5 eme additional injector in front of solenoid valve ramenti.
My mix is ​​enriched with 25%
0 x
User avatar
nlc
Econologue expert
Econologue expert
posts: 2751
Registration: 10/11/05, 14:39
Location: Nantes




by nlc » 09/10/08, 14:09

You only have one injector?
0 x
User avatar
manoria68
Éconologue good!
Éconologue good!
posts: 301
Registration: 07/10/08, 12:34
Location: ATLANTIS
x 2




by manoria68 » 09/10/08, 17:04

It is an injection 4 semi-sequential points
0 x
User avatar
nlc
Econologue expert
Econologue expert
posts: 2751
Registration: 10/11/05, 14:39
Location: Nantes




by nlc » 09/10/08, 17:17

that is to say ??
0 x
User avatar
manoria68
Éconologue good!
Éconologue good!
posts: 301
Registration: 07/10/08, 12:34
Location: ATLANTIS
x 2




by manoria68 » 09/10/08, 17:54

Its mean that I have 4 injectors that inject 2 X 2 pairs once so 2 cylinders, then 2 cylinders.
It is an economic compromise with the single point injection (1 injector for 4 cylinders)
0 x

Back to "biofuels, biofuels, biofuels, BtL, non-fossil alternative fuels ..."

Who is online ?

Users browsing this forum : No registered users and 115 guests