wind resistance discharge

[claudelemonnier]

I look for a plan or solution to achieve an overflow for wind resistance.
I have a generator 1 kw with a charge controller Tristar 45 A.
What thread and use any length. Thank you for all the answers.

[chatelot16]

this kind of resistance is only one electric radiator

1Kw you said but you did not say the tension ... it is essential to know the voltage to calculate the wire

it is not necessary to calculate: just take an electric radiator and MODIFY

a radiator 1KW 220V becomes a radiator 1kW 110V if we share the length of wire in 2 and we put the 2 piece in parralele

if we want 24 V is divided into 10 and 10 the branch piece PARALLEL ... given the number of electric radiator that leave a scrap it is not hard to find

[claudelemonnier]

Okay I forget to specify that the generatrice was in 24v
Thank you

[izentrop]

Hello,
Good idea for resistance, but wind it is not already equipped with a mechanical brake device or flag?
What reference?

[Obamot]

Hello Claude,

Part of the answer is in the question?
Welcome!

PS: the plan is not we who can know, lack of elements?
section of a wire also depends on its length, so back to question what will be the length of the cable?
Here a computer (download) Cable section: http://www.destockable.fr/blog/18_calculatrice-de-section-d-un-cable-en-fonction-de-l-intensite-ou-la-puissance-la-tension-et-la-longueur.html
here a simpler but online: http://entraidelec.com/calcul-section-de-cable.html#outil-de-calcul
(After entering the required parameters, hoping that it will be useful)

[claudelemonnier]

L, wind is a personal construction with permanent magnets generatrice liberations tv sold by imagency, Montee avecmise flag
resistance is put to avoid overloading the battery to meet connecting the controller tristar 45a