Problem with my well water booster
Problem with my well water booster
hello, coming from a well I wanted to connect this one with a booster, strainer with non return, a filter with anti mud coil but the water was still yellow (clearly visible in the wc) so I add a filter with cleanable cartridge and always one wound in the second but the water is always yellow moreover when the pump starts the first washable filter empties is difficult to fill as long as the network is open (watering hose open for example ) what to do to have clearer water is why does the filter drain halfway when starting? thank you for replies and have a good weekend
0 x
Are the filters placed at the outlet of the booster?
- the strainer must not be placed on the bottom of the well but at least 20 cm from the bottom and as much from the upper level (to eliminate as much as possible the suction of sludge
the flow rate may be too high because the suction absorbs the deposited sludge - reduce the flow rate by adjusting the tap on the outlet
- if air remains in the filters, reduce the diameter of the end of the flow pipe or put a non-return valve on the flow pipe as close as possible to the filters, it is possible that an air intake will take place as soon as stopping the pump
- the strainer must not be placed on the bottom of the well but at least 20 cm from the bottom and as much from the upper level (to eliminate as much as possible the suction of sludge
the flow rate may be too high because the suction absorbs the deposited sludge - reduce the flow rate by adjusting the tap on the outlet
- if air remains in the filters, reduce the diameter of the end of the flow pipe or put a non-return valve on the flow pipe as close as possible to the filters, it is possible that an air intake will take place as soon as stopping the pump
0 x
every morning you look naked in a large ice after 3 minutes you will see that your home and your worst picture ......
hello the first problem is solved, it was necessary to put the pots at the outlet of the booster is to leave only a small front filter to coarsen so more air intake, for mud or impurté, I was only watering for this year and seeing with time because I have the impression that the ground is not yet stable and the earth passes between the nozzles !! to follow and thank you
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 29 Replies
- 16887 views
-
Last message by oli 80
View the latest post
13/06/21, 11:11A subject posted in the forum : Water management, plumbing and sanitation. Pumping, drilling, filtration, wells, recovery ...
-
- 11 Replies
- 22722 views
-
Last message by izentrop
View the latest post
09/02/21, 09:50A subject posted in the forum : Water management, plumbing and sanitation. Pumping, drilling, filtration, wells, recovery ...
-
- 1 Replies
- 8738 views
-
Last message by thibr
View the latest post
28/07/18, 07:16A subject posted in the forum : Water management, plumbing and sanitation. Pumping, drilling, filtration, wells, recovery ...
-
- 3 Replies
- 6625 views
-
Last message by Ahmed
View the latest post
18/05/18, 22:18A subject posted in the forum : Water management, plumbing and sanitation. Pumping, drilling, filtration, wells, recovery ...
-
- 7 Replies
- 11732 views
-
Last message by Bardal
View the latest post
08/04/18, 18:07A subject posted in the forum : Water management, plumbing and sanitation. Pumping, drilling, filtration, wells, recovery ...
Who is online ?
Users browsing this forum : No registered users and 163 guests