Problem of well drilled on sandy ground

Work concerning plumbing or sanitary water (hot, cold, clean or used). Management, access and use of water at home: drilling, pumping, wells, distribution network, treatment, sanitation, rainwater recovery. Recovery, filtration, depollution, storage processes. Repair of water pumps. Manage, use and save water, desalination and desalination, pollution and water ...
New topic Reply
kick
I discovered econologic
I discovered econologic
posts: 1
Registration: 03/12/11, 20:33

Problem of well drilled on sandy ground




by kick » 06/12/11, 22:07

I am making a well on sandy ground. When I got to the water (4m from the ground), I put a 160mm PVC tube on which I made small 1,5mm notches. I remove a lot of sand, the pipe that I put down a good meter but my concern is that the sand is so fine that it passes through the holes of the pipe but this sand prevents me from going down more. If anyone can advise me, thank you in advance.
0 x
Skin
User avatar
antoinet111
Grand Econologue
Grand Econologue
posts: 874
Registration: 19/02/06, 18:17
Location: 29 - Landivisiau
x 1




by antoinet111 » 06/12/11, 22:32

you dig it with water?

fout a hose of compressed air at the bottom and balance the sauce.
0 x
I vote for the writing of concrete post and practicality.
Down the talkers and ceiling fans!
Skin
dedeleco
Econologue expert
Econologue expert
posts: 9211
Registration: 16/01/10, 01:19
x 10




by dedeleco » 06/12/11, 22:39

Read the 11 pages thoroughly:
https://www.econologie.com/forums/post216304.html#216304
and read the links in it.
0 x
Skin
 


  • Similar topics
    Replies
    views
    Last message
New topic Reply

Go back to “Water management, plumbing and sanitation. Pumping, drilling, filtration, wells, recovery ... "

Who is online ?

Users browsing this forum : Google Adsense [Bot] and 149 guests