The MAHG of jlnaudin (help me to understand it)

Tips, advice and tips to lower your consumption, processes or inventions as unconventional engines: the Stirling engine, for example. Patents improving combustion: water injection plasma treatment, ionization of the fuel or oxidizer.
dudu x2
I understand econologic
I understand econologic
posts: 54
Registration: 23/11/05, 14:08
Location: 49600

The MAHG of jlnaudin (help me to understand it)




by dudu x2 » 10/01/06, 02:32

I like JLNAUDIN (brief review)

I trust in these experiments, the MAHG which is probably one of the best success stories.

IT has managed to obtain a higher return 1 ...

you will find more information on his website ...

http://jlnlabs.imars.com/mahg/index.htm

Finally, this is what I want is with your help understand better the system, exploit knowledge that can replicate trials.

Here I m'interresse to MAHG is also the doing that I'm in progress of an optimized electrolysis with NLC. (Watch link in my avatar)

I find it is a lot of information interressante not operate ...


C not necessarily obvious to talk about something we do not know
then I suggest progress on issues that we essera each answer.

IF you decide you launch you go until I studied a little better the system.

if there are more allaise (both the technical side that English level) I even offers them to detail the operation. voltage used, frequency, explanation on the construction of MAHG, etc ...

goal simply explain the operation ...
0 x
Christophe
Moderator
Moderator
posts: 79295
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 11028




by Christophe » 10/01/06, 10:14

This process plays on the difference in reaction enthalpy that there would be in the breaking of hydrogen (be careful, this is not combustion!) ... i.e. H2 -> 2 H +

Indeed ; it would take less energy to break down the H2 than the energy of the recombination of atomic hydrogen would provide. (see work of langmuir)

https://fr.wikipedia.org/wiki/Irving_Langmuir

At use, we can see a heat pump without heat exchanger ... but what about the stability of the COP in time?
Last edited by Christophe the 10 / 01 / 06, 10: 33, 2 edited once.
0 x
User avatar
nlc
Econologue expert
Econologue expert
posts: 2751
Registration: 10/11/05, 14:39
Location: Nantes




by nlc » 10/01/06, 10:20

Dudu Hey, should we finish may be ongoing things before moving anything else not ???? : Lol: : Lol: : Lol: : Lol:

Because we do everything at the same time and nothing advances;)

You end pantone and Electrolyses and then returns to meyer and MAHG?

What do you think about it ? ;)
0 x
dudu x2
I understand econologic
I understand econologic
posts: 54
Registration: 23/11/05, 14:08
Location: 49600




by dudu x2 » 10/01/06, 20:37

I was just working my brain waiting to move forward on the current system !!! : Oops:

that work never quite small c bete there !!! : Lol:

And on my side it going dsl c ... Even if not faster. it was worth the wait once we save € More 200 stainless ... : Evil:

and on my side I have my spad envis not put it back on the buddy tractor because there are welds that departs. I too envis repressed 2 or 3 litters of water out of the engine ...

no the sapd I drop ...

It was much better in the hand ... And I just try to understand better the MAHG principle to take our ideas for electrolysis ... : Wink:
0 x
User avatar
snono
I learn econologic
I learn econologic
posts: 22
Registration: 22/11/04, 09:37




by snono » 11/01/06, 10:21

And you're right.
So many things are exploring
0 x
Christophe
Moderator
Moderator
posts: 79295
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 11028




by Christophe » 11/01/06, 10:28

dudu x2 wrote:on my side my spad not envis I put it back on the buddy tractor because there are welds that departs. I too envis repressed 2 or 3 litters of water out of the engine ...

no the sapd I drop ...

It was much better in the hand


Spad done by you or by Apte?
Bcp better quickly said ... on paper ... I am willing in practice I doubt ...
0 x
User avatar
nlc
Econologue expert
Econologue expert
posts: 2751
Registration: 10/11/05, 14:39
Location: Nantes




by nlc » 11/01/06, 10:35

No it was he who did it.

And for electrolysis, it will be fixed soon ...
0 x
User avatar
wirbelwind262
Éconologue good!
Éconologue good!
posts: 238
Registration: 29/06/05, 11:58
Location: Fouras
x 29




by wirbelwind262 » 26/01/06, 17:44

Hello !
I like to know the nature of the radiation emitted by the MAHG because
he said that no abnormal radiation (no alpha, beta or gamma and X-radiation) is issued, but how does what he, then, that the geiger counter measures ionizing rayonnemment a dose?
If you have to put a layer of lead around, there's enough emission of radon and other nuclear power plants!
Personally, I am skeptical about the harmlessness of his "my stuff" radioactive!
If anyone can explain what causes this?
merci!
@ + And good luck !!!!
0 x
User avatar
gegyx
Econologue expert
Econologue expert
posts: 6980
Registration: 21/01/05, 11:59
x 2905




by gegyx » 27/01/06, 17:20

wirbelwind262 wrote:no abnormal radiation (no alpha, beta or gamma and X-radiation) is issued, but how he did it, then, that the geiger counter measures ionizing rayonnemment a dose?

Read in another forum:
a Geiger counter in fact detects the ionisation in the rarefied gas tube which serves as a sensor, the ionization can be caused to 4 ways:
1) helium nuclei (alpha)
2) Electrons (beta)
3) X-ray or UV hard
4) Passage of a radio pulse HF powerful


Can be filtered with a screen such as an aluminum foil, which will intercept the first 2.
0 x
dudu x2
I understand econologic
I understand econologic
posts: 54
Registration: 23/11/05, 14:08
Location: 49600




by dudu x2 » 06/02/06, 23:59

continued guys it becomes interresting (sorry guys if I'm not very present but I work hard on my hydrogen system) ...


so not too much time to his system peeled


but it continued interest me!
0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "Special motors, patents, fuel consumption reduction"

Who is online ?

Users browsing this forum : Google [Bot] and 124 guests