Your local network: Wifi or RJ45?

Hi-tech electronic and computer equipment and Internet. Better use of electricity, help with the work and specifications, equipment selection. Presentations fixtures and plans. Waves and electromagnetic pollution.

My local network is in:

You can select 1 option

 
 
Consult the results
User avatar
Superform
Éconologue good!
Éconologue good!
posts: 294
Registration: 09/11/04, 14:00




by Superform » 25/06/08, 11:32

It is also necessary to avoid putting 220 at the same time as RJ45, even screened ... because the 220 is not screened, him ...

I would even say: minimum 4 x 2 RJ45 per piece

a set of 2 per corner

why 2? either to switch the phone or to go back and forth ...

with my customers during "pro" installs I systematically double the number of sockets required at the base, and they still manage to put switches on certain sockets because not enough space ...
0 x
Matt113
Éconologue good!
Éconologue good!
posts: 344
Registration: 22/05/08, 09:15




by Matt113 » 25/06/08, 11:40

Superform wrote:I would even say: minimum 4 x 2 RJ45 per piece


that makes us 8 takes per piece, that's a bit much for an individual anyway, especially since most people will not know what to do with all these takes.
0 x
User avatar
Superform
Éconologue good!
Éconologue good!
posts: 294
Registration: 09/11/04, 14:00




by Superform » 25/06/08, 15:26

I know some who change the layout of their living room every 2 months ...

so I think it's useful for them ...

there are wall sockets where the 2 rj45 sockets fit on the location of a legrand type socket, it's less ugly ...

and there are double rj45 cables, it avoids pulling 2 cables :)
0 x
bamboo
Econologue expert
Econologue expert
posts: 1534
Registration: 19/03/07, 14:46
Location: Breizh




by bamboo » 25/06/08, 15:59

Are you putting more RJ45 sockets than electrical sockets there : Lol:
For example, 1 standard room has 3 220V sockets according to the standard.

Superform wrote:It is also necessary to avoid putting 220 at the same time as RJ45, even screened ... because the 220 is not screened, him ...

I would even say: minimum 4 x 2 RJ45 per piece

a set of 2 per corner

why 2? either to switch the phone or to go back and forth ...

with my customers during "pro" installs I systematically double the number of sockets required at the base, and they still manage to put switches on certain sockets because not enough space ...
0 x
Solar Production + VE + VAE = short cycle electricity

 


  • Similar topics
    Replies
    views
    Last message

Back to "Electricity, electronics and computers: Hi-tech, Internet, DIY, lighting, materials, and new"

Who is online ?

Users browsing this forum : No registered users and 159 guests