Okofen CMP1.4b 2010 failure

Heating, insulation, ventilation, VMC, cooling ... short thermal comfort. Insulation, wood energy, heat pumps but also electricity, gas or oil, VMC ... Help in choosing and implementation, problem solving, optimization, tips and tricks ...
sergeolivier
I discovered econologic
I discovered econologic
posts: 4
Registration: 19/01/23, 11:39

Okofen CMP1.4b 2010 failure




by sergeolivier » 19/01/23, 11:54

hello Boiler Okofen CMP1.4b 2010
need help yesterday I started my boiler and it does not start, so I go to the regulation and what do I see, nothing. just sprachen (Language) so I put French back and all my instructions have disappeared, do you have an answer to this problem?

thank you for your reply
0 x
sicetaitsimple
Econologue expert
Econologue expert
posts: 9772
Registration: 31/10/16, 18:51
Location: Lower Normandy
x 2638

Re: Okofen failure




by sicetaitsimple » 19/01/23, 12:55

Really just in case, have you tried completely unplugging the boiler (via the power outlet or by opening the circuit breaker), then plugging it back in?
I had the joke twice last year (malfunction once of the gas boiler and once of the stove oven), in both cases it's gone again! Blessed by the gods, perhaps....
Either way, it's worth a try.
0 x
sergeolivier
I discovered econologic
I discovered econologic
posts: 4
Registration: 19/01/23, 11:39

Re: Okofen failure




by sergeolivier » 19/01/23, 12:59

thank you sicetaisimple. Yes. I disconnected and restored the current. well. No. always nothing :(
0 x
Christophe
Moderator
Moderator
posts: 79117
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10972

Re: Okofen CMP1.4b 2010 failure




by Christophe » 20/01/23, 13:41

If absolutely nothing happens, it's probably an internal fuse in the boiler...
0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "Heating, insulation, ventilation, VMC, cooling ..."

Who is online ?

Users browsing this forum : No registered users and 405 guests