Reduced temperature inoperative on Okofen's Easypell

[tanner52]

Hello,

If the boiler is connected, I would be curious to see the settings made by this pro…

No it is not, it seems that the wi-fi connection is no longer possible...? (I just questioned Okofen live to have confirmation).

Can I take pictures of the touch screen? but not sure where it is?

[izentrop]

I have a little trouble understanding how one can want to "finely" regulate an interior temperature (of the type 20° during the day and 18° at night) without having an interior sensor..... That is beyond me. All the more so in mid-season when the solar gain but also the outside temperatures can vary greatly from one day to the next.

For my case, by default the user interface including the room sensor is incorporated into the indoor unit.
The remote user interface is an option that was not offered to me, the indoor unit being in the heated volume of the house. Then I have a thermostatic valve on each group of radiators.

Since I don't have a remote room sensor, I only have access to adjusting the water law and setpoint by time programming and that's enough for me. No interior temperature adjustment at this level and never noticed any nighttime overheating.

The test did not provide the values ​​expected by the heating engineer because
20°/12° gives night T°: 19,8° at 3 a.m. (= 4 hours before resumption of daytime T°).

checked manually at specified times or data automatically recorded?

[Pilpoill]

Hello,

If the boiler is connected, I would be curious to see the settings made by this pro…

No it is not, it seems that the wi-fi connection is no longer possible...? (I just questioned Okofen live to have confirmation).

Can I take pictures of the touch screen? but not sure where it is?

What touchscreen do you have? A picture maybe?
If it's the one I know I could try to guide you then.

[tanner52]

checked manually at specified times or data automatically recorded?

All the readings were taken by me, on the same thermometer, in the same room, in the same place, under the same conditions, where we have 20,5 during the day.

[tanner52]

What touchscreen do you have? A picture maybe?
If it's the one I know I could try to guide you then.

https://www.icloud.com/iclouddrive/0d3b ... an_tactile

[sicetaitsimple]

I have a little trouble understanding how one can want to "finely" regulate an interior temperature (of the type 20° during the day and 18° at night) without having an interior sensor..... That is beyond me. All the more so in mid-season when the solar gain but also the outside temperatures can vary greatly from one day to the next.

For my case, by default the user interface including the room sensor is incorporated into the indoor unit.

So you do have an interior probe, but it is not remote. There I understand.

[Pilpoill]

What touchscreen do you have? A picture maybe?
If it's the one I know I could try to guide you then.

https://www.icloud.com/iclouddrive/0d3b ... an_tactile

It's the old visual interface, is it possible to create operating curves and then share them with us by recovering them with a usb port on the back?

On Okofen the menu should be called "record", do you have something similar among all the menus?

[tanner52]

Sorry for my silence in this conversation.
I don't see any of that, nor any USB port for that matter (I can't access the back of the screen).
I found a curve, but I don't think that's what you're interested in?

okofen-courbe.jpg (120.17 KiB) Viewed 1469 times

[Pilpoill]

By clicking on the screen at the level of the graph, a menu allowing to choose the number of curves should appear.

If it works, I'll let you know which ones to spawn.

[Christophe]

Sorry for my silence in this conversation.
I don't see any of that, nor any USB port for that matter (I can't access the back of the screen).
I found a curve, but I don't think that's what you're interested in?

Thank you for using the image host of the forum (PJ function) ... I corrected for this last message