Combined wood baby 1130 the motor blows the weights of my electric meter

And if they were repairing rather than throwing and change? Rediscover the pleasure of the repairs yourself. How to diagnose a problem or find spare parts? Repair itself is way to save money generally!
User avatar
Obamot
Econologue expert
Econologue expert
posts: 28725
Registration: 22/08/09, 22:38
Location: regio genevesis
x 5538

Re: Combined wood baby 1130 the motor blows the weights of my electric meter




by Obamot » 03/04/21, 23:13

As long as this "new" failure did not exist "before", I am of the opinion that it would be better to review all connections first.

Because you look smart afterwards, with a brand new, beautiful condo, if the symptoms persist ... : Oops:
(Just my 2 cents of € uro ...)
0 x
pascaldubord
I learn econologic
I learn econologic
posts: 20
Registration: 26/03/21, 17:44
x 3

Re: Combined wood baby 1130 the motor blows the weights of my electric meter




by pascaldubord » 06/04/21, 18:16

Here it is to repair the engine always turns in the good direction and starts without assistance!
It was one of the capacitor's leads that was in the wrong place.

Suddenly I degauchi and planer all the afternoon and the ....
BING new failure the planer drive roller no longer drives.
Too tired to watch today but in my opinion 2 possible causes:

Or a mechanical failure that prevents the roller from turning
Either the roller turns but the asphalt has become too degraded and is no longer driving anything.

Are there any connoisseurs here for this kind of problem?
Thank you
Attachments
20210405_102415.jpg
0 x
User avatar
Obamot
Econologue expert
Econologue expert
posts: 28725
Registration: 22/08/09, 22:38
Location: regio genevesis
x 5538

Re: Combined wood baby 1130 the motor blows the weights of my electric meter




by Obamot » 06/04/21, 18:28

Don't want to replace rusty nuts with new ones once and for all? (There you have put some old ones back) : Cheesy:

Because any electrical device is a bit like a battery, if you have the beginnings of corrosion at one end, it ends up contaminating anything that can rust (the case of cars). Your rusty nuts will again contaminate the axles, which are clean, too bad!

Other than that, congratulations on the rest.

No idea for the new breakdown. But:
- if the engine no longer turns, I told you that an engine creates vibrations. Could it be possible that one of your new “borderline” cable lug crimps has failed? A bad contact would have appeared?
- if it's training, and it makes more noise, maybe there is a tensioner somewhere that has loosened with the vibrations and the efforts?
- there is no photo, we can not guess ...

RTDC.
0 x
pascaldubord
I learn econologic
I learn econologic
posts: 20
Registration: 26/03/21, 17:44
x 3

Re: Combined wood baby 1130 the motor blows the weights of my electric meter




by pascaldubord » 06/04/21, 18:34

Oops yes I will put new nuts.

The reel is entirely mechanical and is driven by a chain.
Thanks anyway
0 x

Back to "failure, troubleshooting and repair: repair yourself? "

Who is online ?

Users browsing this forum : No registered users and 132 guests