Help for my solar battery installation

Forum solar photovoltaic PV and solar electricity generation from direct radiation solar energy.
Matenjo
I understand econologic
I understand econologic
posts: 92
Registration: 14/10/19, 16:55
x 1

Help for my solar battery installation




by Matenjo » 25/10/19, 19:24

Hello everyone
Will there be connoisseurs to help me?
Here I live a small mazet and I made a small solar installation for my self consumption but I have a few questions because it does not work very well.
I am located in the hérault.
My first questions would be whether it is possible that my solar panels produce volts and no amps or watt? If so, how does it do?
Awaiting thanks a lot to who can help me
0 x
User avatar
GuyGadebois
Econologue expert
Econologue expert
posts: 6532
Registration: 24/07/19, 17:58
Location: 04
x 982

Re: Help for my solar installation




by GuyGadebois » 25/10/19, 19:31

Hello, I think that here, several people will be able to help you, but with more information:
What material, what brand, what reference, what editing?
0 x
“It is better to mobilize your intelligence on bullshit than to mobilize your bullshit on intelligent things. (J.Rouxel)
"By definition the cause is the product of the effect". (Tryphion)
"360 / 000 / 0,5 is 100 million and not 72 million" (AVC)
Matenjo
I understand econologic
I understand econologic
posts: 92
Registration: 14/10/19, 16:55
x 1

Re: Help for my solar installation




by Matenjo » 25/10/19, 20:46

Thank you for interest in my subject.
Here are actually 6 200wt panels and 6wt other 300
For the moment everything is not put yet I still have 3 300wt installed.
Tomorrow I will not fail to tell you the brand and the reference because I am not my mazet lack of lack of power.
For connection the 6 of 200wt are connected together
3 plus set has less and the other 3 same then its 2 sets of three panels connect more / more and less / less and I leave that on a plus and a minus that go to my brand charge regulator mppt 60 amp that that if plugged into my 48v battery pack.
The regulator displays at the highest 72v and with an average of 52v but the concern that often marks to me 0 amp and to see 0 watt or I arrive at maximum to 1,5 amperes.

As for 3 other 300wt boards this is 2 plugged together and the other one and the only 32v to display and no amp and watt knowing that this is plugged into my 5kv easysun hybrid brand UPS which it tells me that 32vlt and nothing else.
I tried to connect them at the same time on my regulator mppt but there is that the 32vlt that is displayed and it is not cumulated with my first 200wt so I preferred unplug them in the meantime because with my 200wt connection it works very just and with those of 300wt I do not recharge anything.
It's already 3 once I dry my battery.
Can this be due to the inclination of my panels? Its one of the other questions I ask myself.

I'm really new to this topic, but if someone can help me find out how to do it, I'd be happy to do it even if I have to change everything
because I can not get out more than 200wt device connected and this is really embarrassing and I understand nothing because I still have the equivalent of 3000wt solar panels.

Again thanks to those who can help me to have a correct installation and also sorry for not being able to express myself better.
0 x
A.D. 44
I posted 500 messages!
I posted 500 messages!
posts: 640
Registration: 15/04/15, 15:32
Location: Home
x 225

Re: Help for my solar installation




by A.D. 44 » 25/10/19, 20:58

Hi,

1 are you in France?

2- did you ask yourself the installation or is it a professional who did the editing?

3- do you have some notions in electricity?
0 x
Matenjo
I understand econologic
I understand econologic
posts: 92
Registration: 14/10/19, 16:55
x 1

Re: Help for my solar installation




by Matenjo » 25/10/19, 21:39

Yes I live in France in the hérault
Those who made the installation as best as I could by looking on the net.
And yes ja notions in electricity.

New news,
For 200wt panels they are SCHUCO brands
for the 300wt I you but the picture as attachments and also two other photos of my panels 200wt installed and also the diagram that I used for the connection of these same panels.
Thank you for your help that I think I need.
PS: tomorrow I would make pictures of my regulator and also of my inverter.

20191025_211756.jpg
My 300wt panels
0 x
izentrop
Econologue expert
Econologue expert
posts: 13644
Registration: 17/03/14, 23:42
Location: picardie
x 1502
Contact :

Re: Help for my solar installation




by izentrop » 25/10/19, 21:56

Hello,
We only wait for the diagram : Wink:
0 x
Matenjo
I understand econologic
I understand econologic
posts: 92
Registration: 14/10/19, 16:55
x 1

Re: Help for my solar installation




by Matenjo » 25/10/19, 22:11

Here is the shema

panneaux_en_série_et_en_parallele.jpg
Shema
panels_in_series_and_en_parallele.jpg (20.1 KIO) Viewed 6159 times
0 x
Matenjo
I understand econologic
I understand econologic
posts: 92
Registration: 14/10/19, 16:55
x 1

Re: Help for my solar installation




by Matenjo » 25/10/19, 22:23

Here are the 200wt panels installed
Thank you
0 x
Matenjo
I understand econologic
I understand econologic
posts: 92
Registration: 14/10/19, 16:55
x 1

Re: Help for my solar installation




by Matenjo » 25/10/19, 22:30

Photo of my installed 200wt solar panels
0 x
izentrop
Econologue expert
Econologue expert
posts: 13644
Registration: 17/03/14, 23:42
Location: picardie
x 1502
Contact :

Re: Help for my solar installation




by izentrop » 25/10/19, 23:06

What is the input range of the charge controller? if not give mark and reference and characteristics of panels 24 V?
0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "Renewable energy: solar electricity"

Who is online ?

Users browsing this forum : No registered users and 164 guests