My hydraulic mill 400 houses?

[Snowy]

Hello to you ! I am new here, I signed up on this to have possible answers on renewable energy and where we are currently in France on this point. whether these blah blah or not! because we are talking about making electricity with clean energies !!! and the water mill which is legion in France and which requires that to crack down on its next, we talk about it very can or not enough, I tell you its because I myself own a mill and which can with its flow of water flowing continuously supply at least a town of 400 see more homes. So to whom to turn to be able to assert this energy potential. thank you

[raymon]

First of all, you have to know when your mill dates from before the French Revolution or before 1919 these two dates were important. if your water right is before 2 for example your right is inalienable and imprescriptible.
But maybe you should have done a research on the forum the subject has already been treated:
https://www.econologie.com/forums/produire-s ... 7-110.html

[Snowy]

hello it is dated in the base of the waterfall 1778 this mill was a dependence of the neighboring abbeys which it is of 1169 of course it underwent moult transformation over the centuries but it still function until the 30s .

[Forhorse]

400 houses ... I doubt it. In 1910 maybe, but in 2016 it would amaze me!
400 houses to supply simultaneously, that's roughly 1MW to supply ... or more than 1300 hp is more than the most powerful of the mills (10 very large mills like 10m in diameter and 10 meters wide on very high flow rivers)

[Ahmed]

It is probably a ghost village ...

[raymon]

For an average French daily consumption of 7 kwh per household, this makes:
7/24 = 290wh per house or 400x0.290 = 116kw of constant power.
Of course, it is a constant average which makes it impossible to manage the peak at 19 p.m. in winter, hence the need for a Swiss network and hydraulic dams, as for our nuclear reactors, moreover.

[Snowy]

hello yes good the teeth of the fork its a little too wide but I have two arms of rivers which feeds the mill a arm of rivers of 4 m wide which passes in the mill for the waterfall, and at 30 meters upstream another river 6 wide, which can feed for a higher flow the other arm of the river which feeds the fall a (condition to repeat winnowing) and for alls tell you that summer and winter I have a constant flow of water at my mill I am in a marshy region I do not lack water even at the height of droughts. (twice water police (ddh) agents came to take photos and record flows of water and photos good to see later.

[Macro]

https://www.youtube.com/watch?v=N4rqVNCxerY

A passionate who got there with the 3 P rule ...

[Snowy]

excuse these not ddh but dde or dda!

[izentrop]

https://www.youtube.com/watch?v=N4rqVNCxerY

A passionate who got there with the 3 P rule ...

What happened?
22000 kwh / year at 0.11 € does not make 22000 € but 2420
The above must deduct the costs.
https://youtu.be/N4rqVNCxerY?t=203

30 kw 24/24 when you have to regulate the water height?
What are the motivations for this video?