good evening, i found videos of free piston engine stirlings, ie the displacer piston on the normal engines is replaced by a spring http://fr.youtube.com/watch?v=IZUTiwSj2 ... re=related and another video with a smaller model http://fr.youtube.com/watch?v=IxlRZd65R ... re=related
http://fr.youtube.com/watch?v=wuoYTWNm5 ... re=related
in the second video it is the heat of a coffee that activates the mechanism, so we could use this type of engine to actuate a piston pump as this video shows it
http://fr.youtube.com/watch?v=-6o9MOQg3 ... re=related
Stirling engine
Hello
Last year I also did a project on the optimization of a Stirling engine but I had 6 months to do it so it was necessarily a little more complete
The super clear reference site on which there is almost everything (at least on the thermodynamic aspect): www.moteurstirling.com
Last year I also did a project on the optimization of a Stirling engine but I had 6 months to do it so it was necessarily a little more complete
The super clear reference site on which there is almost everything (at least on the thermodynamic aspect): www.moteurstirling.com
0 x
stirling engine for pump
hello, looking at the stirling engine free piston, I immediately thought of this type of pump as shown in this video http://fr.youtube.com/watch?v=MDfG6nhfdkA this pump works almost like the hydraulic ram, except the idea is to remove the syteme with the diaphragm, (driving part) and to keep that the piston pump and to the rigor the spring and to replace the system (water hammer ) by a free-piston stirling motor, in short, remove the ariere from the pump and replace it with the hot-air motor
0 x
Hello,
The engines and me it's two but as I have not found trace on the forum this micro cogeneration: Stirling Systems: http://stirling-systems.ch/fr/home.html , I post.
What do the experts think? O)
Bonne journée.
The engines and me it's two but as I have not found trace on the forum this micro cogeneration: Stirling Systems: http://stirling-systems.ch/fr/home.html , I post.
What do the experts think? O)
Bonne journée.
0 x
Frederic
site on ericsson engine
hello here is a link that seems complete on this engineFidi wrote:Hello,
I did some research on the Ericsson engine and I'm looking for someone who could check the equations of thermodynamics that I could ask to have a first idea of the sizing of my machine before building it.
Thanking you in advance,
Cdlt
http://www.moteurericsson.com/
another site http://www.blooo.fr/
0 x
transmission
good evening, here is a rather original transmission system
http://www.youtube.com/watch?v=YvtekHPz ... re=related
it changes the biele and the vibrequin, can work on a stirling, a vacuum motor and can be a motor éricsson
http://www.youtube.com/watch?v=YvtekHPz ... re=related
it changes the biele and the vibrequin, can work on a stirling, a vacuum motor and can be a motor éricsson
0 x
- binbins4
- I understand econologic
- posts: 165
- Registration: 27/12/04, 09:46
- Location: Geneva, Switzerland)
quite the crankshaft system of your video
Here are a on a base in the person of mower us, I'll try to contact him for info
I plan to make a heliostat stirling
http://www.youtube.com/watch?v=oWL-l27s ... re=related
Here are a on a base in the person of mower us, I'll try to contact him for info
I plan to make a heliostat stirling
http://www.youtube.com/watch?v=oWL-l27s ... re=related
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 106 Replies
- 30591 views
-
Last message by Exnihiloest
View the latest post
07/04/21, 22:05A subject posted in the forum : Science and Technology
-
- 4 Replies
- 5902 views
-
Last message by netshaman
View the latest post
11/06/15, 21:13A subject posted in the forum : Science and Technology
-
- 17 Replies
- 33934 views
-
Last message by Christophe
View the latest post
05/06/16, 01:01A subject posted in the forum : Science and Technology
-
- 2 Replies
- 4248 views
-
Last message by Flytox
View the latest post
02/03/08, 23:24A subject posted in the forum : Science and Technology
Back to "Science and Technology"