Hello everyone, Indeed, thanks to Okofen. A busy day for Samuel MUSSO this Wednesday, March 18 (a departure from Chambery in the morning, a visit to Olivier63, another to Chaboum (also Auvergne) and the return to Chambery the same day). An attentive and available person. See you, Ol ...

See my answer on the Okofen France Action post.

At worst if it influenced consumption, it would be lower (I suppose your desired temperature in absence mode is lower than those in comfort or reduced mode).


Olivier.

Hello Chaboum, I just did a test (absence mode for 2 minutes). On the white control, when you press "Enter" once, you are in the main menu. If you use the dial to go to the "Heating circuit 1" option, you see the indication "Ambian ...

@Jericho,

I won't say anything except:


That's why I hadn't had a problem with my 32MB card. Yes yes, the one I got out of the attic ...


See you.


Olivier.

I had fun converting these ÿ into a modulation level, until I realized that the ES parameter (P 116) exactly reflects the modulation level of the boiler.The parameter P116 represents the operating time of the screw . The stronger the modulation, the longer the func ...

Hello everyone, Here are the data that I had collected and the recovery method: - The date, recorded directly on the card - The time, recorded directly on the card - State of the boiler, recorded directly on the card - Temperature from the boiler, recorded directly ...

Excuse me, I'm more ignorant than you, because I hadn't seen the key.


Olivier.

@Jericho,

A remark certainly silly, but your card, it has been inserted in the right direction (not vice versa from top to bottom, but the front of the back).
I had inserted visible CF scriptures.


Olivier.

Too fast Xian ....

Hello Jericho, Xian understood very well what you were saying, and he tells you that if you format your CP card via parameter P297, this would also have the effect of erasing all the modifications made at levels 1 and 2 (this is the warning that is written in the doc ...