Hello everyone I will quickly summarize, I have been using a Ferroli SFL3 wood boiler with a SUN P7 burner since 2014. Yesterday, while carrying out my weekly cleaning of the burner, I noticed that the head of the burner was pierced. A.jpg B.jpg Where the flame licks everything is distorted. Is it normal after ...

Hello Gilou I attributed the few untimely stops to a false contact of my relay. I thought that if there had been a false information from the photoresistor an error code A01, A02 or F02 would be displayed. It is true that it could also come from the card, sometimes the fan goes into r ...

I also found this http://www.emundia.com/ignition-electrode-ferroli-sun-p7-fer39833290 http://pieces-chaudieres.fr/de/sondes/16507-electrode-d-allumage-ferroli -sun-p7.html http://www.ebay.fr/itm/Resistance-allumage-pour-bruleur-a-pellets-Ferroli-SUN-P7-P12-Fer-Lamborghini-/121602362148?pt=LH_De .. .

That's a nice pile of slag! Is the chimney draft correct? (is it a boiler for a fireplace - not with a suction cup?) And how are the stops / operations of the burner managed (room thermostat / boiler / tank)? Do you have a buffer tank, if so what capacity? My first guess ...

I'm a new kid, but ready to help. I have mounted a Sun P7 myself and have heated all winter with it, no problem with the burner itself. And I must point out that the house has never been so hot. 1. What kind of problems do you have? Without details no assistance possible. ...

Hello I was there, then we temporarily dropped the case because of too much work in the house. We had a closed and covered yard of 6m2 with a small hut of 1.2M x 0.8M, for 5-6 hens. The cabin: The front facade is a large door with a hatch to let in and ...

Hello Alex88

u03 = "operating mode", see details on page 58 (9 ° page of pdf):
https://www.econologie.info/share/partag ... bNkXsl.pdf

The defaults for all other settings are also specified in this document.
A+
TS

Hello and happy new year to all of you. Here is the diagram: https://www.econologie.com/fichiers/partager3/1420232926enNVCV.jpg Red circuit = hot water flow, blue circuit = return. The small purple diamonds represent the valves. On the left, the boiler and its load loop. The yellow inverted triangle r ...

Zero Hour. In English, but that problem for me.
It is the prolific father Clive

In response to all concerning the untimely shutdowns, these obviously take place when I close the cover of the box which protects the relay, and I think that when it heats up false contacts occur (absence of ventilation of the relay). Without the cover no problem, and I can finish ...